Hertalan Easy Cover
Verified by manufacturer 3 months ago
Easy Weld
Easy Weld
BBA Agrément Certificate
Certificate type
EPDM waterproof membrane, factory pre-fabricated into large areas.
Application
Suitable for:
- Forming ballasted, adhered or mechanically fixed, single ply roofs on new build and refurbishment projects.
- Use on concrete and timber-based substrates, as well as insulation boards laid over profiled metal sheet, and existing bituminous roof coverings.
Description
A pre-fabricated EPDM waterproof membrane.
Features and benefits:
- Rolls of EPDM are thermally bonded in the factory to form large membranes, with a maximum weight of 2500 kg and a maximum size of 2,000 m².
- Roofs can be rapidly waterproofed, with no seams being formed on the roof.
- High tensile strength and elongation at break.
- 100% ozone and UV – radiation resistance.
- Permanent elasticity.
- Resistant to many chemicals (list available on request).
- Resistant to root penetration (FLL approved in accordance with DIN 4102 T7).
- Self-extinguishing (NEN 6383).
- Bitumen resistant.
- Temperature stability from -40 to + 120ºC.
- Properly installed the system has a life of at least 35 years.
General information
Color | Black |
Finish | Anti-slip |
Material | EPDM |
Shape | Rectangle |
Length | Bespoke |
Width | Bespoke |
Height | 1.5 mm |
Warranty description | 20 year |
Uniclass | |
CAWS | J42/10 Warm deck roof covering J42/110 Warm deck roof covering J42/120 Inverted roof covering J42/130 Cold deck roof covering |
Product range |
Specification data - Polymeric membranes
Material | Ethylene propylene diene monomer (EPDM). |
Standard | To DIN EN 13956 and DIN EN 13967. |
Third-party certification | British Board of Agrément (BBA) Certificate and QA Certificate.Guidance for specification option: FLL approved in accordance with DIN 4102 T7. |
Width (minimum) | 10 000 mm. |
Thickness (minimum) | 1.2 mm.Guidance for specification option: Standard thickness. 1.5 mm.2.0 mm. |
Colour | Black. |
Accessories | easy cover rainwater outlets.Guidance for specification option: easy cover rainwater outlets have the same dimensions as standard pre-fabricated outlets but are supplied with a TPE layer for hot air welding. easy cover roof drains.easy.weld CS – 100 mm.Guidance for specification option: The underside of these strips is covered entirely in TPE. easy.weld CS – 150 mm.Guidance for specification option: The underside of these strips is covered entirely in TPE. easy.weld CS – 200 mm.Guidance for specification option: The underside of these strips is covered entirely in TPE. flash.weld.Guidance for specification option:
Hertalan flashing.Guidance for specification option:
ks137 adhesive.ks205 adhesive.ks96 adhesive. |
Vapour control layer | Depending on internal conditions a vapour control layer may be required. Manufacturer guidanceConsult Hertalan (UK) for details. |
Protection layer | Where easy cover is mechanically fixed a separating layer of Hertalan easy tex may be required to prevent the membrane 'drumming' on the substrate or damaging EPS insulation board. Guidance for specification option:
|
Perimeter sealer | easy cover should be fixed along the whole perimeter with ks137, ks205 or ks96 adhesive. |
Type | easy weld. Guidance for specification option:
|
Dimensions | 30 x 70 m. Manufacturer guidanceConsult manufacturer for details. |
Maximum weight | 2500 kg. |
Sustainability data
Country of material origin | Netherlands |
Country of product manufacture | Netherlands |
Recyclability | Recyclable |
Third party certifications
BBA Agrément Certificate
BBA
Case studies
Fashioning Poplar