NBS Source
Height Restrictors Fixed
Compare variants

Application

Suitable for:

  • Use on commercial and industrial sites.
  • Use on sites where limited overhead clearance will cause problems for high sided vehicles such as multi-story or underground car parks.

Description

The AUTOPA Fixed Height Restrictor:

  • Has a standard clearance of 2.05 m and limits access to high sided vehicles such as HGV’s and Caravans.
  • Height restrictors are ideal for use on sites where limited overhead clearance will cause problems for high sided vehicles such as multi-story or underground car parks.
  • Manufactured from galvanized mild steel, the body of the height restrictor is coated red as standard (other colours are available upon request; please state BS/RAL numbers at time of order).
  • The Fixed Height Restrictor is available ragged or flanged and can be fitted with a knocking bar and/or a maximum height warning sign upon request.
  • Knocking Bar: 48 mm diameter tube.
  • Standard Clearance: 2.05 m.
  • 3 mm wall thickness.
  • 600 mm below ground (ragged only).
  • Main Body: 90 x 90 mm square tube.


The AUTOPA Double Fixed Height Restrictor:

  • Limits access to high sided vehicles and is perfect for use on commercial and industrial sites.
  • The height restrictor has a standard clearance of 2.05m and spans two carriageways, preventing vehicles from circumventing the access control measures in place.
  • Manufactured from galvanized mild steel, the body of the height restrictor is available ragged or flanged and is coated red as standard. Other colours are available upon request (please state BS/RAL numbers at time of order).
  • To alert drivers of the oncoming obstruction knocking bars and maximum height warning signs can be added as required.
  • Knocking Bar: 48 mm diameter tube.
  • Standard Clearance: 2.05 m.
  • 600 mm below ground (ragged only)


Installation:

  • Flanged Height Restrictors require bolting down to a suitable concrete surface (not less than 600 mm³) by means of four 16 mm bolts per leg.
  • Ragged Height Restrictors require an excavated hole of at least 600 mm³ for casting into concrete per leg.
  • It is recommended that suitable signs are installed to ensure vehicles are aware of the obstruction.


General information

Color

Red

Standard.

Other

BS/RAL colours are available on request.

Finish

Galvanized

Material

Steel

Length

3000 mm

4000 mm

5000 mm

6000 mm

7000 mm

Show more

Height

2050 mm

WarrantyDescription

One year

This product is guaranteed for 12 months (if installed and used correctly).

Uniclass

Pr_30_59_59_38 Height restrictorsPrimary

CAWS

Q41/190 Vehicle access point barriers

Q41/230 Height restrictors

Specification data - Height restrictors Enhanced data

Clearance dimensions

-

Height

2050 mm.

Span

3000 mm.

Material

-

Posts

Mild steel.

Overhead beams

Mild steel.

Finish as delivered

-

Applied finish

Galvanized.

Colour

Red.

Standard.

Special order.

State BS/RAL numbers at time of order.

Accessories

Not required.

138 500 725 - 3m Knocking Bar.

8.8 kg.

138 500 730 - 4m Knocking Bar.

11 kg.

138 500 735 - 5m Knocking Bar.

15.4 kg.

138 500 740 - 6m Knocking Bar.

18.7 kg.

138 106 287 - Maximum Height Warning Sign.

138 100 991 - M16 Expanding Bolt (8 required per Height Restrictor).

Fixing

Ragged.

Flanged.

Size/ Type

Fixed.

Weight

69.3 kg.

Standards

To ISO 9001, ISO 14001 and OHAS 18001.

Environmental information

Country of product manufacture

United Kingdom

Similar products from AUTOPA Limited

Height Restrictors Fixed with Swing Gate

Height Restrictors Fixed with Swing Gate

Height Restrictors Swing

Height Restrictors Swing

Height Restrictors Swing with Swing Gate

Height Restrictors Swing with Swing Gate