Hawa Junior 80 B Pocket

Application

For use by people of all abilities, including in the following locations:

  • Retirement homes.
  • Care homes.
  • Shopping centres.
  • Schools.
  • Public buildings.
  • Family homes/ apartment complexes.
  • Hotels.

Description

Sliding hardware for wall pocket solutions, for use with single wooden doors with a weight up to 80 kg, an opening width between 70–1500 mm, and a thickness between 40–50 mm.

Features and benefits:

  • Suitable for use in low headroom applications.
  • Helps to optimize room space.
  • Fitting and removing the running track is possible due to the provision of a retainer profile with a bayonet lock. All components can be replaced or extended, dependent project requirements.
  • Easy insertion of the door into the pocket: The pivot point of the suspension unit is at the end of the door on the pocket side. The suspension unit on the pocket side can be pushed towards the middle of the door during installation.
  • Easy and efficient height adjustment when the door is installed.
  • The suspension unit has been designed specifically for pocket installation, and the clip-on cover is suitable for concealed mounting.
  • The separating layer between the running track and retainer profile reduces vibration transmission (structure-borne noise).
  • The end position can be adjusted via the suspension trolley in the pocket when the door is open.
  • Includes a laterally adjustable rattle-proof floor-mounted guide and a rattle-proof, removable top track assembly.
  • Door push-out can be integrated in the running track.
  • Vertically adjustable (±3 mm), with integrated anti-twist protection. Horizontally adjustable (± 8 mm) in the bayonet.

Components:

Quantities of each component will vary dependent on variant specified - consult manufacturer for details.

  • Two-wheeled trolley, M10, with plastic wheels.
  • Top fixed suspension with plate and hanger bolt M10 (25074, two supplied).
  • Top fixed suspension with plate and hanger bolt M10, 20 mm longer than the standard bolt (26014, two supplied).
  • Track stop, adjustable retaining force.
  • Screw-on rubber door stop.
  • Guide, rattle proof, for screw mounting to floor, groove width 10 mm, black plastic. 35 mm long, laterally adjustable.
  • Suspension assembly locking wrench.

Applications:

For use by people of all abilities, including in the following locations:

  • Retirement homes.
  • Care homes.
  • Shopping centres.
  • Schools.
  • Public buildings.
  • Family homes/ apartment complexes.
  • Hotels.

General information

Uniclass 2015

Pr_30_36_36_23 Door track and running gearPrimary

CAWS

P21/10 Quantities and locations

P21/350 Door track and running gear

Specification data - Door track and running gear

Product Reference

Hawa Junior 80 B Pocket (25074)

Hawa Junior 80 B Pocket, with longer hanger bolt (26014)

Allows the running track to be covered from below with removable ceiling elements.

Running track

1400 mm

1600 mm

1800 mm

2000 mm

2200 mm

2500 mm

3000 mm

Cut to size

Insert requirements.

Closing mechanism

Not required

SoftMove 80

Accessories/ Other requirements

Not required

Clip-on cover, 2000 mm

Aluminium, plain anodized. For concealed attachment of the lintel panelling up to a material thickness of 40 mm.

Set for mountable and demountable running track, 2000 mm

Set for mountable and demountable running track, 2500 mm

Set for mountable and demountable running track, 3000 mm

Spring-loaded door stop

Variants available, consult manufacturer for details.

Standard product features

Configuration:

Wall pocket.

Product Options

Running track:

Aluminium, plain anodized, pre-drilled (hole positions vary - consult manufacturer for details). The length of the running track must not exceed the diagonal clearance.

Assembly set:

Offers a high level of protection from running track contamination during the construction phase. The running track can be installed and removed at any time once the pocket is completed. The rattle-proof bayonet lock with entry ramp makes it easier to install the running track in the retainer profile.

Accessories/ Other requirements:

Spares are also available, consult manufacturer for details.

Similar products from Hawa Sliding Solutions AG