N13/472 Hand dryers
With white painted cover.
With stainless steel cover.
Standard product features
18-gauge, type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge carbon steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim and side panels. Cover equipped with uniquely designed dual air outlets. Air-inlet is equipped with vandal-resistant grille. Cover projects no more than 100 mm from wall and is secured to mounting base with two vandal-resistant, recessed hex screws.
20-gauge (1.5 mm) plated steel with four (6 mm) diameter mounting holes.
350 wide x 345 high x 100 mm deep.
Universal, 1/7 hp, 8000 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at non-drive end. Equipped with automatic thermal-overload switch.
Two balanced, double-inlet centrifugal fans are mounted on motor shaft; directs airflow over heating element at 71 cfm.
Two coiled nickel-chrome heating elements are mounted in mica frame and protected by automatic thermal-overload switches. Heating elements, heat air without hot spots - inaccessible to vandals.
Infrared sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
No-touch operation: electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Dual air outlets provide a swirling circulation of airflow for comfortable hand drying. Drying time less than 25 s. Remove hands from path of sensor and dryer stops. Dryer operates only when actually drying hands, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.
DuraDry Surface Mounted Hand Dryers - B-770, B778
Hand Dryer B-715E
Hand Dryer, InstaDry™ B-7125
Recessed Automatic Hand Dryer B-3725
Recessed Paper Towel Dispenser, Automatic Hand Drier and Waste Bin B-38030
Recessed Paper Towel Dispenser, Waste Bin and Hand Dryer B-38033, B-815969
TerraDry Surface Mounted Hand Dryers B-7180, B7188