This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more

NBS Source
Hammerite Special Metals Primer

Application

  • For use on interior or exterior substrates and is suitable for priming aluminium, brass, chrome, copper and galvanized metals, as well as stainless steel.
  • Not suitable for temperatures above 80°C, for immersion or for surfaces in contact with potable water or foodstuffs.

Description

A water-based primer providing a smooth finish in just one coat and promoting good adhesion of topcoat to stainless steel and non-ferrous metal surfaces.


Features and benefits:

  • A smooth even finish for topcoat adhesion - can be overcoated with most paints after only two hours.
  • Only one coat required.
  • Touch dry in 30 minutes (depending on weather conditions).

General information

Finish

Smooth

Material

Water-based

Shape

Formless

Uniclass

Pr_35_31_66_96 Waterborne metal primersPrimary

CAWS

M60/12 Gloss paint

M60/130 Gloss paint

M60/14 Eggshell/ satin paint

M60/150 Eggshell/ satin paint

M60/175 Protective coating

M60/18 Special coating

M60/195 Special coating

Specification data - Waterborne metal primers

Execution

Consult manufacturer's literature.


  • All surfaces must be clean and dry.
  • Remove loose rust, flaking paint and the gloss from old paintwork by wire brushing and/ or rubbing down with coarse abrasive paper.
  • Treat any rusted patches with Hammerite Kurust.
  • Degrease thoroughly with a detergent solution then rinse thoroughly with clean water and allow to dry.
  • Stir paint thoroughly.
  • Do not apply when there is a risk of rain, frost or if the temperature falls below 5°C.

-

Coverage

Brush (one coat): 12 m²/L.

Capacity

500 ml.

Can

250 ml .

Can