NBS Source
Hammerite Special Metals Primer

Application

  • For use on interior or exterior substrates and is suitable for priming aluminium, brass, chrome, copper and galvanized metals, as well as stainless steel.
  • Not suitable for temperatures above 80°C, for immersion or for surfaces in contact with potable water or foodstuffs.

Description

A water-based primer providing a smooth finish in just one coat and promoting good adhesion of topcoat to stainless steel and non-ferrous metal surfaces.


Features and benefits:

  • A smooth even finish for topcoat adhesion - can be overcoated with most paints after only two hours.
  • Only one coat required.
  • Touch dry in 30 minutes (depending on weather conditions).

General information

Finish

Smooth

Material

Water-based

Shape

Formless

Uniclass

Pr_35_31_66_96 Waterborne metal primersPrimary

CAWS

M60/12 Gloss paint

M60/130 Gloss paint

M60/14 Eggshell/ satin paint

M60/150 Eggshell/ satin paint

M60/175 Protective coating

M60/18 Special coating

M60/195 Special coating

Specification data - Waterborne metal primers Enhanced data

Execution

Consult manufacturer's literature.


  • All surfaces must be clean and dry.
  • Remove loose rust, flaking paint and the gloss from old paintwork by wire brushing and/ or rubbing down with coarse abrasive paper.
  • Treat any rusted patches with Hammerite Kurust.
  • Degrease thoroughly with a detergent solution then rinse thoroughly with clean water and allow to dry.
  • Stir paint thoroughly.
  • Do not apply when there is a risk of rain, frost or if the temperature falls below 5°C.

-

Coverage

Brush (one coat): 12 m²/L.

Capacity

500 ml.

Can

250 ml .

Can