Hammerite Direct To Rust Metal Paint Satin Finish
Verified by manufacturer 6 months ago
Smooth satin finish for metal formulated to perform as primer, undercoat and topcoat in one.
Application
- Suitable for application to corroded metal substrates without an additional primer or undercoat.
- For use on both interior and exterior substrates.
Description
A durable, corrosion resistant coating with a mid sheen finish, suitable for protecting and decorating ferrous and non-ferrous metals.
Features and benefits:
- Smooth satin finish.
- Up to eight years' rust protection.
- Ultra tough - excellent weather resistance.
- Apply direct to rust.
General information
Finish | Satin |
Material | Solvent-based |
Shape | Formless |
Uniclass | |
CAWS | M60/175 Protective coating M60/150 Eggshell/ satin paint M60/195 Special coating M60/14 Eggshell/ satin paint M60/18 Special coating |
Specification data - Solvent-based finishing coats
Composition | Manufacturer's standard. |
Sheen | Satin. |
Colour | Black.White. |
Execution | Brush application.Guidance for specification option: Do not thin. On previously painted metal in sound condition, one coat should be sufficient. On bare/ rusty metal two coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur. Spray application.Guidance for specification option: Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% thinners to paint. Set spray gun at 25/35 psi and use full fan spray at maximum volume. Apply four thin coats. Allow one hour between coats. Refer to spray equipment manufacturer's guidelines for the correct and safe use of sprayers. |
Format | Aerosol. Can. Contractor's choice. |
Coverage | Aerosol: 0.5 m² per 400 ml can. Brush (two coats): 4.5 m²/L. |
Capacity | 750 ml. Guidance for specification option: Can. 400 ml. Guidance for specification option: Aerosol. 250 ml. Guidance for specification option: Can. |
Viscosity | 5,37 cm²/s. |