NBS Source
List your products

This product is no longer available

Application

For indoor use.

Should be kept at temperatures between 18–22°C, and at a relative humidity between 50–60%. Any direct contact with heat sources should be avoided.

See manufacturer's literature for details on stains, dirt and similar surface defects.

Description

Decorative melamine-faced chipboard (MFC) substrate according to EN 14322, with both sides melamine-impregnated in gloss optics.

Features and benefits:

  • Easy to clean.
  • Light-fast (according to EN 14323).
  • Abrasion and scratch resistant (EN 14323).
  • PEFC™ or FSC® certification available on request.
  • Both sides are covered with protective foil.

Components (from top to bottom):

  • Decor paper.
  • Chipboard substrate (type P2, according to EN 312).
  • Decor paper.

Applications:

For indoor use.

Should be kept at temperatures between 18–22°C, and at a relative humidity between 50–60%. Any direct contact with heat sources should be avoided.

See manufacturer's literature for details on stains, dirt and similar surface defects.

General information
Specification data
Product Reference

GetaLit® High Gloss MFC

Length

Basic range and fixed sizes are available. Consult manufacturer and insert requirements.

Width

Basic range and fixed sizes are available. Consult manufacturer and insert requirements.

Thickness

Consult manufacturer and insert requirements.

Colour/ Finish

Consult manufacturer's literature and insert requirements.

Standard product features

Fire behaviour (to DIN 4102-1):

B2 (normal flammability).

Technical characteristics:

  • Formaldehyde emission (to EN 13986): Class E1.
  • Stain resistance (to EN 14323): ≥ a moderate change in gloss level and/ or colour.
  • Light fastness (to EN 14323): Grey scale 4–5.
  • Abrasion resistance: ≥ a moderate change in gloss level and/ or colour (for Uni decors); surface damages (for printed decors).
  • Scratch resistance: ≥1.5 N (some intensive decors may features lower values).
  • Distortion: ≤4 mm/m (for an identical structure on both sides).
  • Edge fissures: Standard size: ≤10 mm; fixed size: ≤3 mm.

Product Options

Length and width:

  • Basic range: Allow ±5 mm.
  • Fixed sizes: Allow ±2.5 mm.

Thickness:

Allow ±0.3 mm.