NBS Source
I'm a manufacturer

GenieMat PMI - Perimeter Isolation Strip

Verified by manufacturer 2 months ago


Extruded polyethylene foam perimeter isolation strip.

Jump to:
+44 203 9846444 Website


To be attached at the base of the perimeter wall of the entire subfloor, as well as around the perimeter of any protrusions, prior to unrolling and installing GenieMat underlayment products, in order to isolate or break the vibration transmission path between the floor and the wall.


Flat, resilient, extruded polyethylene foam perimeter isolation strip that is used as perimeter isolation so that no hard surface (floor covering) touches any hard vertical surface (protrusion or wall).

Features and benefits:

  • Reduces noise flanking in acoustic-isolated assemblies.
  • Easy to unroll, cut, and install.
  • CE marked.

General information








50000 mm


120 mm


5 mm

Warranty description


Guidance for specification option:

Pliteq Inc. is a corporation duly organized and validly existing under the laws of the province of Ontario. Pliteq offers a limited lifetime warranty on the GenieMat® brands of Impact Sound Insulation products against defects in material and workmanship and GenieMat® shall meet all published specifications and shall perform effectively.

Pliteq warranties that during the warranty period GenieMat® shall not harden, become brittle, chip, crack, tear, or exhibit any signs of excessive deterioration except for normal wear and tear. All other warranties, including implied warranties for a particular purpose, are expressly excluded. The sole remedy against the seller will be the replacement or repair of the defective goods, or at seller's option, credit may be issued not exceeding the selling price of the defective good.

Manufacturer guidance

The recommendations for applications and installation are based on our extensive experience and on current technological practice. Our liability and responsibility in the event of damages is limited to the extent defined in our General Terms and Conditions of Business and is not in any

way increased by the above recommendations or by advice given by our sales representatives or applications engineering staff.


Pr_25_71_44_28 Extruded polyethylene (PE) foam joint fillersPrimary


K11/295 Floating floor system

K11/27 Acoustic separating floor system

K11/275 Acoustic separating floor system

K11/25 Particleboard floating floor

K11/225 Particleboard floating floor

K11/20 Battened particleboard floating floor

K11/125 Battened particleboard floating floor

Specification data - Extruded polyethylene (PE) foam joint fillers




5 mm.


120 mm.


50 m.

Roll weight

0.765 kg.

Sustainability data

Contains Red List materials


Country of product manufacture



100% Recyclable


GenieMat FF Installation Guide

GenieMat FF Installation Guide

GenieMat FFNP Installation Guide

GenieMat FFNP Installation Guide

GenieMat CE DoP

GenieMat CE DoP

GenieMat FF70/FF70LDM Installation Guide

GenieMat FF70/FF70LDM Installation Guide

Hoteliers Acoustic Design Guide

Hoteliers Acoustic Design Guide

Mixed-Use Buildings Acoustic Design Guide

Mixed-Use Buildings Acoustic Design Guide