An abutment flashing ventilator providing an airflow path equivalent in area to a continuous opening of 5 mm.
Manufactured by injection moulding EVA and copper, with a mastic sealant strip.
The flexible nature of the flash vent enables quick and easy installation on all profiles and flat tiles and slates.
The tortured path created by the pin array has also been designed to maximize support of the lead and provide an integral flyscreen.
The product provides free airflow of 5000 mm²/m and is designed for a minimum pitch of 15°.
The flash vent ventilates a pitches roof abutment detail and provides a weather tight airflow path equivalent in area to continuous opening of 5 mm.
The mastic strip on the underside adheres the product to the tile profile.
Flash vent has been independently wind tunnel tested for weather tightness and can be used over profiled tiles without compromising its effectiveness.
235 mm wide available in 3 m rolls. Ten copper fixing clips for each 3 m roll
H60/675 Top edge ventilated abutments
H61/675 Top edge ventilated abutments
H62/675 Top edge ventilated abutments
H65/675 Top edge ventilated abutments
Standard product features
235 mm wide available in 3 m rolls. Ten copper fixing clips for each 3 m roll.