NBS Source
I'm a manufacturer
Compare variants

Freestanding Box Rooflight - Right Exit

Verified by manufacturer 4 months ago

Double glazed

Glazing Vision Ltd Variant:
Third party certifications:
  • Qualicoat approval

    Qualicoat approval

    Certificate type

Electrically operated glazed box rooflight with one section of glass sliding over a fixed section providing approx 50% opening. Includes dual colour thermally broken framework.

Jump to:
BOS
+44 (0)1379 658300 Website

Application

Suitable for flat roof for easy and regular access to rooftop deck or roof terrace.

Description

Sliding rooflight with one single sliding door retracting over fixed glazing available in either a free standing Skybox rooflight or a three wall mounted version. It is a good option for terraced access as it offers a physical structure and the fixed walls of glass provide a balustrade around the opening. It also allows the handrail to continue right up to the point of leaving the box and stepping onto the roof terrace. The box rooflight consists of two sections, one fixed section and one sliding section. The sliding section slides over the fixed section to create a 50% clear opening thus allowing the user to walk through and out of the rooflight. All the glass used is flush to allow water runoff and easy cleaning, whilst maintaining maximum security. The thermally broken detail on the fixed frame and insulated flashings on the sliding frame almost eliminates direct contact between the warm internal frame and the exterior cold air, reducing heat loss and condensation forming. Carriage design includes large diameter wheels to give minimal rolling resistance on the anodized rails. Includes drainage on the lower track to reduce build up of debris within the framework. All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within day. Manual override of the unit is via a 90° turn of an Allen key to engage/ disengage the motor from the drive mechanism and allow the product to be pushed open/ closed. The rooflight is opened electrically, operated by a rocker switch positioned at the discretion of the client. It includes a ‘one touch’ facility, where the switch is pressed and then released leaving the rooflight to open automatically. The unit can be stopped by pressing close once or can be only part opened by keeping the switch pressed until the desired point is reached.


Features and benefits:

  • Drive mechanism: Rack and pinion.
  • Visual quality of glass: To the Hadamar standard.
  • To ISO 9001 and ISO 14001.
  • The Rooflight Association Member
  • Qualicoat: approved applicator

General information

Color

Grey

Guidance for specification option:

Standard. RAL 7015 slate grey on the exterior.

White

Guidance for specification option:

Standard. RAL 9010 white on the interior.

Other

Guidance for specification option:

RAL, special order.

Finish

Powder-coated

Guidance for specification option:

Qualicoat approved.

Material

Aluminium

Glass

Shape

Rectangle

Guidance for specification option:

Box.

Length

Bespoke

Width

Bespoke

Height

Bespoke

Warranty description

Ten year

Guidance for specification option:

If installed by Glazing vision Ltd

Two year

Guidance for specification option:

If installed by alternate company

Uniclass

Pr_30_59_72_31 Framed rooflightsPrimary

CAWS

L10/45 Rooflights

L10/460 Rooflights

Specification data - Framed rooflights

Form

Box.

Size

As drawing.

As schedule.

Frame

-

Material

Aluminium.

Guidance for specification option:

Extruded thermally broken aluminium profiles, grade 6063 T6.

Finish

-

Coating

Polyester powder coating.

Guidance for specification option:

To the Qualicoat standard.

Colour

RAL 7015 slate grey and RAL 9010 white.

Guidance for specification option:

Standard. RAL 7015 slate grey on the exterior; RAL 9010 white on the interior.

RAL, special order

Guidance for specification option:

Dual colour; consult manufacturer's literature for more information.

Glazing or infill

-

Type

Glass units.

Construction

Double glazed.

Colour

Clear.

Integral kerb

Guidance for specification option:

Insert requirements; consult manufacturer's literature for more information.

Operation

-

Type

Powered, electric.

Control

Control Board and magnetic limit switches.

Guidance for specification option:

With proximity sensors to prevent entrapment.

Accessories

Not required.

BMS Integration.

Enduroshield easy clean glass coating.

Guidance for specification option:

Gives a non-stick surface making the glass easier to clean and keep clean, stay clean for longer and resist staining and discoloration.

Rain sensor.

Rain sensor overrides.

Guidance for specification option:

Insert requirements.

Remote control.

Ritec glass coating.

Solenoid bolt.

Thermostat.

Execution

Installation of framed rooflights.

Rooflight

3 Wall Box Rooflight.

Guidance for specification option:

Wall abutted on three sides.

Free Standing Box Rooflight.

Power supply

24 V battery operated.

Guidance for specification option:

240 V mains supply required for trickle charging batteries via control board.

Seals

Rubber seals and brush strip.

Security

Anti-lifting mechanism.

Guidance for specification option:

To prevent disengagement of drive mechanism via vertical movement of sliding frame.

Outer

6 mm clear toughened heat soak tested.

Manufacturer guidance

Glazing.

Inner

8.8 mm heat strengthened PVB laminated soft coat low E (1.1).

Manufacturer guidance

Glazing.

Spacer

18 mm black silicone sealed argon filled cavity.

Manufacturer guidance

Glazing.

CenterCoreSpacing

Not applicable.

Manufacturer guidance

Glazing.

Drive

Rack and pinion.

Manufacturer guidance

Drive mechanism.

Sustainability data

Country of material origin

Europe

Country of product manufacture

United Kingdom

Material

Aluminium

Glass

BIM objects

BOS

NBS BIM Object Standard

This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.

Find out more about the NBS BIM Object Standard.

Platform Compatible Version
Revit

Revit 2016

2

IFC

IFC2X3

1

Third party certifications

Qualicoat approval

Qualicoat approval

Qualicoat Certificate

Literature

Free Standing Skybox Rooflight Technical Data Sheet

Free Standing Skybox Rooflight Technical Data Sheet

Case studies

Free Standing Box Rooflight For Music Centres

Free Standing Box Rooflight For Music Centres

Similar products from Glazing Vision Ltd

Fixed Lantern Rooflight

Fixed Lantern Rooflight

Fixed Octagonal Pyramid Rooflight

Fixed Octagonal Pyramid Rooflight

Fixed Pyramid Rooflight

Fixed Pyramid Rooflight

Fixed Ridgeglaze Rooflight

Fixed Ridgeglaze Rooflight

Flushglaze Fixed Circular Rooflight

Flushglaze Fixed Circular Rooflight

Flushglaze Fixed Eaves Rooflight

Flushglaze Fixed Eaves Rooflight

Flushglaze Fixed Rooflight - One Wall Abutment

Flushglaze Fixed Rooflight - One Wall Abutment

Flushglaze Fixed Rooflight - Singlepart

Flushglaze Fixed Rooflight - Singlepart

Flushglaze Fixed Rooflight - Three Wall Abutment

Flushglaze Fixed Rooflight - Three Wall Abutment

Flushglaze Fixed Rooflight - Two Wall Abutment

Flushglaze Fixed Rooflight - Two Wall Abutment