Formulated Acrylic Bonding Agent and Admixture using Newton HydroCoat LiquaBond - Acrylic Bonding Agent & Admixture
Verified by manufacturer 4 months ago
Formulated acrylic admixture used both as a primer for wet-to-dry cementitious systems where bond is increased significantly waterproofs cement-based mixes and increases the adhesion to substrate.
Application
Suitable substrates include:
- Concrete
- Mortar
- Stone
- Cement-based waterproofing slurries
Suitable applications:
- As a primer to increase the adhesion of HydroCoat 107 Elastic 2K to concrete substrates.
- As a primer to increase the adhesion of render to HydroCoat 107 Elastic 2K
- Increases the bond of internal angle fillets.
- As an admixture to sand/cement screeds to provide a fully bonded screed.
- As an admixture to sand/cement repair mortar providing greater workability and adhesion.
- Bonding agent between new and old concrete.
- Bonding agent between render and brick and concrete walls.
- Sealing walls and ceilings prior to painting in high humidity areas such as bathrooms and kitchens.
Application - Tack Coat
Apply with brush or roller in one single coat, spreading the mix as evenly as possible. Avoid ponding. Bond to vertical surfaces can be increased by adding small quantities of OPC to the mix. Brush well into the vertical surface.
When rendering over waterproofing slurries, add OPC to the mix as described above and apply a 5mm bonding coat of render that includes HydroCoat 908-LB to the mix, lightly scratching and roughing up the surface ready for the main scratch coat.
Description
Formulated acrylic admixture used both as a primer for wet-to-dry cementitious systems and as a high-performance admixture in cement-based mixes.
Features and benefits:
- High bond strength – Provides excellent adhesion when used as a bonding agent or as an admixture in cement-based mixes.
- Resilient – When used as an admixture, an acrylic lattice is formed throughout the mix, greatly reducing brittleness and enhancing resistance to impact damage.
- Water resistance – Combines low permeability with resin stability in continuously wet conditions when used in cement-based mixes.
- Versatile – Easy to use with high bond to a wide range of materials such as brick, stone, concrete and a wide range of metals.
- Delayed bonding – When used as a bonding agent, subsequent toppings may be applied immediately or up to seven days later.
- Eliminates the need for water curing.
- Product stability – Specially formulated for maximum performance under alkaline conditions of cement mixes. Unlike PVA systems, the bond film will not hydrolyse under wet conditions.
General information
Color | White Manufacturer guidanceMilky white when cured. |
Finish | Smooth |
Material | Liquid Guidance for specification option: Acrylic bonding agent and admixture |
Shape | Formless Guidance for specification option: Liquid product used as a primer, admixture, and bonding agent. |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Lifetime |
Uniclass | |
CAWS | J10/110 Proprietary mortar J10/120 Cement: sand mortar with proprietary waterproof admixture |
Product range |
Specification data - Waterproofing mortar admixtures
General requirements | Manufacturer guidancePrepare the substrate as recommended for the product to be applied to the 908 LiquaBond or that the 908 LiquaBond will be mixed into, but generally the substrate should be free from laitance, grease, oils, dust and debris. |
Performance requirements | Manufacturer's standard.Guidance for specification option: HydroSeal 908-LB is a formulated acrylic admixture used both as a primer for wet-to-dry cementitious systems where the bond is increased significantly, and as a high performance admixture which waterproofs cement-based mixes as well as greatly increasing the adhesion of the product to the substrate. Please refer to the curing table on the datasheet for this information. Do not apply prior to rain. Do not apply at temperatures lower than +5°C or higher than +35°C. The application of Newton 908 LiquaBond requires no special skill sets, but is often used within exacting specifications and with products that require particular skill sets, such as waterproofing. |
Admixture | High performance admixture which waterproofs cement-based mixes. |
Density / Specific gravity | 1.04. |
Shelf life | 12 months. |
Application method - Tack coat | Brush or roller. |
Application temperature | +5°C to +35°C. |
Capacity | 5 L or 25 L containers. Guidance for specification option: Coverage as tack coat: 0.15–0.40 L/m². Coverage as an admixture: 100 L/m³. |
Sustainability data
Contains Red List materials | No |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Recyclability | 0 |
Literature
HydroCoat LiquaBond TDS
Case studies
Waterproofing Retaining Basements on a Sloping Site