Flexible Bullnose Edging

Application

Suitable to resist high wear points and provides a nice curved edge to your deck.


Installation:

Edging profiles need to be fully supported along their length by the perimeter joists, supported by a minimum of 25 mm at the back by the joist. These profiles need to be fixed to the joist every 200—300 mm centres using the Durafix fixings.

Description

Designed to resist high wear points and provide a nice curved edge to your deck, the structural core of Millboard Flexible edging is a blend of natural minerals bonded in a flexible polymer resin. Available in nine colours, the top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.


Features and benefits:

  • 100% wood-free and hand-moulded, on three sides, to give a real-wood grain representation.
  • Unique Lastane® finish provides low slip potential, and is resistant to scratches, food and drink stains, and everyday wear and tear.
  • Millboard Durafix® stainless steel screw fixings sink into the Lastane® material to achieve a virtually indistinguishable mark.
  • Non-porous composition makes it resistant to algae, insects and liquids (including fats, food, drink and urine).
  • Manufactured under ISO 9001:2015 Quality Standards, ISO 14001 Environmental Standards and ISO 45001:2018 Occupational Health and Safety Standards.
  • Thicker layer of Lastane® to resist higher wear points.
  • The Flexible Bullnose Edging will bend to a radius of 1.2 m.

General information

Material

Polymer

The structural core of Millboard Flexible edging is a blend of natural minerals bonded in a flexible polymer resin.

Shape

Rectangle

Size

50 x 32 x 2400 mm

WarrantyDescription

25 years

Residential limited structural warranty.

Five years

Commercial limited structural warranty.

Uniclass 2015

Pr_25_71_63_72 Recycled plastics deck boardsPrimary

CAWS

Q55/110 Deck

Q55/380 Deck boards

Specification data - Recycled plastics deck boards Enhanced data

Finished size

-

Section

50 x 32 mm.

Length

2400 mm.

Colour

Antique Oak.

Brushed Basalt.

Embered/ Burnt Cedar.

Coppered Oak.

Golden Oak.

Show more

Fixings

Millboard Durafix® stainless steel T15 decking screws 4.5 x 60 mm.

Millboard Durafix® stainless steel T15 decking screws 4.5 x 45 mm.

Edging

Edging support.

200-300 mm centres.

Edging must be supported the full way along its length, fixed every 200 - 300 mm centres. 

Surface finish

Moulded from hand selected prime oak samples.

Top layer

Lastane® layer

The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.

Similar products from Millboard Company Ltd, The

Enhanced Grain Decking

Enhanced Grain Decking

Fascia Boards

Fascia Boards

Lasta-Grip Decking

Lasta-Grip Decking

Square Edging

Square Edging

Weathered Oak Decking

Weathered Oak Decking