Verified by manufacturer over a year ago
RubberBond FleeceBack EPDM, fully or adhered waterproofing membrane, for use on low sloped roofs with limited access.
A BBA approved RubberBond FleeceBacked EPDM (Ethylene-Propylene Diene Monomer) waterproof membrane, a non-reinforced EPDM joined with a patented hot melt adhesive technologyto a thick polyester fleece. Designed for fully adhered installations on warm or cold roof constructions. The system is available with a range of accessories, including Semi Cured Pressure Sensitive Tapes, Uncured Pressure Sensitive tapes, pipe seals, roof drains, moulded walkway pads and a range of roof edge products. Installation is carried out by trained independent Approved Local Contractors. The membrane is available in a slate grey finish.
Uniclass | |
CAWS | J42/10 Warm deck roof covering J42/110 Warm deck roof covering J42/120 Inverted roof covering J42/130 Cold deck roof covering J42/400 Waterproof membrane |
Product range |
Product Reference | FleeceBack EPDM |
Colour | Black/ Grey |
Thickness | 2.54 mm |
Accessories | 75mm Pressure sensitive secure tapeGuidance for specification option: For overlap seaming of sheets, alternatively use membrane with FAT 150mm Pressure Sensitive Cover StripGuidance for specification option: Semi cured for butt joints of membrane and seaming to edge trims & adjoining materials. 225mm Pressure Sensitive Uncured tapeGuidance for specification option: For all detailing work Pressure Sensitive Pipe sealGuidance for specification option: To fit pipes 13–75 mm. Pressure Sensitive Pipe sealGuidance for specification option: To fit pipes 13–75 mm. Pressure Sensitive Walkway padGuidance for specification option: Walkway Pad is designed to protect the membrane and give a non slip walkway in those areas exposed to repetitive foot traffic. HP-250 PrimerGuidance for specification option: To be used in conjunction with all Pressure Sensitive goods Decking AdhesiveGuidance for specification option: Water Based Acrylic Adhesive (WBA) or Polyurethane Adhesive PU Bonding AdhesiveGuidance for specification option: For adhering membrane at angle changes and upstands Water Cut Off MasticGuidance for specification option: Used as a sealing agent between various membranes and applicable when membrane is being terminated using a compression type seal. Termination barsGuidance for specification option: For mechanical termination to perimeter and upstands, used with Water Cut Off Mastic HP FastenersGuidance for specification option: For mechanicle fixing of insulation board, to be used with insulation plates 55mm - 175mm Insulation PlatesGuidance for specification option: For fastening of insulation to be used with HP fasteners 75mm x 75mm Angle roof drainGuidance for specification option: Outlet opening 90 mm x 90 mm. Anti Back Up DrainGuidance for specification option: 68mm Top DrainGuidance for specification option: 110mm outlet Drip trimGuidance for specification option: Refer to manufacturer for range of depths. Edge trim 75/ 150Guidance for specification option: Refer to manufacturer for full colour range. Wall trimGuidance for specification option: 25 x 100 x 3000 mm. RB FastenersGuidance for specification option: Available in 35 mm & 45mm for perimetere edge trim fastening Paving Support discsGuidance for specification option: used for patio roofs to support paving slabs & decking above the membrane surface. |
Standard product features | Roll size:
3.05 m x 15.25 m with Factory Applied Tape (FAT) Tensile strength:
Elongation (BS 903-A2):
Water vapour permeability (BS 3177): 0.3 g/m²/day. |
Product Options | Optional Factory Applied Tape (FAT) for faster seaming of membrane on site. |