Firestrip® 30

An intumescent strip sealant which can provide 30 minutes resistance to the passage of fire and smoke when used to glaze a wide variety of glass types into internal doors and softwood or hardwood timber screens.

Features and benefits:

• Fully tested to provide 30 minutes resistance to the passage of fire and smoke in timber doors and screens.

• Quick, clean and easy to apply.

• British Woodworking Federation (BWF) Certifire Scheme Certificate No. CF297 for use in timber screens and doors for periods of 30 minutes fire resistance.

• Good high tack surface provides a high level of adhesion.

• Tested with a wide variety of non-insulating and insulating glass types.

• Can be over-coated with paints and decorative wood stains.

• Quick, clean and easy to apply.

• Cost-effective compared to other rigid/ semi-rigid fire resistant materials.

• Non-toxic.

Standards/ Approvals:

• BS 8000-7.

• FIRAS register of specialist fire protection materials – Manufacturers and Suppliers.

• Glass and Glazing Federation Glazing Manual Section 2.8 Fire Resistant Glazing, 13. Table of Tested Products and Materials. 9.1.2 Glazing Materials – Strips.

Applications:

• The product is used for glazing non-insulating and insulating glass into timber fire doors and softwood or hardwood timber screens with hardwood beads using Hodgson FG2 Glazing System.

• Consult literature for details of which glass can be glazed using Firestrip® 30.

• Dependent on the use of suitable fire resistant glass and suitable frame design. Consult the manufacturer for further details.