Fire Shutter - Fireroll VR60

One hour insulated heat and fire resisting roller shutter tested to EN 16341 and classified as EI60, in accordance with EN 13501-2. It is CE marked accordingly.

The product has all the advantages of a rolling fire product which can be stored above the false ceiling, whilst meeting the requirements of both integrity and insulation in line with the latest Building Regulations.

Features and benefits:

• Operation: Electrical operation is by means of a 400 V nominal direct drive three-phase motor mounted on one end plate. In the event of a fire and/ or mains failure, a 24 V dc auxiliary drive unit closes the door.
•  Controls: A control panel is supplied for mounting at high level, which incorporates batteries and a facility for an incoming fire signal. Cables between the panel and motor are to be flameproof. Low level control is by means of open, close, stop push button on the face of the control panel.
• Curtain: Constructed from 63 x 36 mm synthetic material laths infilled with high-performance insulation. Stainless steel cables connect the laths together and are fastened to the barrel at the head.
• Bottom rail: Comprises a standard lath fitted with an extruded polyvinyl chloride (PVC) bottom seal.
• Guides: Side guides are formed from galvanized steel channels with a black intumescent insert and prepared for fixing to the opening structure.
• Roller: The roller is manufactured from carbon steel tube of sufficient diameter and wall thickness to resist deflection and is mounted on bearings on each endplate.
• Endplates: Fabricated from galvanized steel of adequate thickness relative to door size and supplied with steel plates for fixing to the structure.
•  Head Seal: An arrangement comprising galvanized steel 'U' profile and MDF board with fire cover are fixed to the lintel at the point where the top of the door engages providing a seal against the passage of flames and hot gases.