BBA Agrément Certificate
Independent lining system, non-fire rated.
Metal stud lining system based on Fermacell Powerpanel H2O linings.
K10/155 Wall lining system (metal studs)
K10/30 Metal stud
Fermacell 3S02 H2O Independent Lining
Manufacturers standard. Height (maximum): 3.9 m.
Powerpanel Surface Finish
Standard product features
- Stud centres:
Cavity between wall and studs (minimum):
Two Layers layer of 12.5 mm Fermacell Powerpanel H20 board.
N.B. For Powerpanel H2O - ALL joints must be fully supported / backed.
35 mm Powerpanel screws at 400 mm centres and 40 mm Powerpanel screws at 250 mm centres.
Fermacell Jointstik 1 mm glued joint for square edged boards.
Powerpanel Surface Finish.
N.B. Tiles must NOT be fixed over Powerpanel Surface Finish.
All Powerpanel H2O joints must also be reinforced with an alkali resistant 70 mm Glass Fibre Mesh reinforcement Tape embedded into the Powerpanel surface finish.
Fire stopping around service penetrations. Frame out openings with the same number of layers of board as per above specification. Sockets backed using baffle boxes, intumescent putty pads or suitable rock mineral wool, sufficient to maintain the fire/acoustic performance.
Movement joints are required at maximum 8 linear metre intervals.
Refer to manufacturer's literature. Vapour barrier as required for high humidity areas.
For tiled areas reduce studs to 400 mm centres as required. Tile adhesive to be suitable for cement based substrate.
Provide door reinforcement as required to suit door weights and opening size. Ensure no vertical joints at door jambs.
Offset all board joints by minimum 200 mm.
Both boards must be fixed back into the stud.
Fermacell 3S01 H2O Independent Lining
Fermacell 3S01 Independent Lining
Fermacell 3S11 H2O Independent Lining
Fermacell 3S12 Independent Lining
Fermacell 3S21 Independent Lining
Fermacell 3TP01 Wall Lining on Adhesive Dabs
Fermacell 3WH01 Wall Lining on Timber Subframe
Fermacell 3WH02 Wall Lining on Timber Subframe
Fermacell 3WS01 Adjustable Wall Lining on Steel Subframe
Fermacell 3WS02 Adjustable Wall Lining on Steel Subframe