Felt Support Tray

Application

  • Position on top of the fascia board and fix into place with nails.
  • Lap adjacent trays by a minimum of 150 mm to form a continuous run and adequately support roofing underlay.
  • Fit on top of any over-fascia vent.
  • Lay the roofing underlay tight to ensure that there are no troughs for water to sit: its bottom edge should be higher than the line of the fascia board to avoid exposure to the elements and consequential degradation.

Description

PVC tray designed to support pitched roof underlays at eaves, preventing ponding behind the fascia. The tray prevents the underlay draping into the gutter and UV degradation of the underlay. Suitable for new building and re-roofing applications.

Application:

  • Position on top of the fascia board and fix into place with nails.
  • Lap adjacent trays by a minimum of 150 mm to form a continuous run and adequately support roofing underlay.
  • Fit on top of any over-fascia vent.
  • Lay the roofing underlay tight to ensure that there are no troughs for water to sit: its bottom edge should be higher than the line of the fascia board to avoid exposure to the elements and consequential degradation.

General information

Uniclass 2015

Pr_30_59_29_62 Plastics eaves underlay supportPrimary

CAWS

H60/355 Ventilated eaves with separated grilles/ trays

H60/365 eaves

H60/47 Eaves

H61/355 Ventilated eaves with separated grilles/ rays

H61/365 Unventilated eaves

H61/47 Eaves

H62/355 Ventilated eaves with separated grilles/ trays

H62/365 eaves

H62/47 Eaves

H65/355 Ventilated eaves – separated grilles/ trays

H65/365 Eaves

H65/47 Eaves

Specification data - Plastics eaves underlay support

Product Reference

Felt Support Tray

Standard product features

Size (w x l):

180 mm x 1.5 m.

Overhang:

50 mm.

Literature