This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more
Two-component polymethyl methacrylate (PMMA)-based waterproofing resin system.
Warm flat roof constructions.
Two-component polymethyl methacrylate (PMMA)-based waterproofing resin. Requires mixing with IKO Polimar FCS (Fast Curing System) Catalyst before use - consult manufacturer for details.
Features and benefits:
Color | Grey |
Material | Polymethyl methacrylate (PMMA) |
Length | Bespoke |
Width | Bespoke |
WarrantyDescription | 20 year |
Uniclass | |
CAWS | J31/10 Warm deck roof coating J31/120 Warm deck roof coating J31/353 Waterproof coating |
Preparation | - |
Horizontal work | IKOpro Bonding Agent.IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C. IKOpro Sprayfast MPP.KOpro Sprayfast MPP (Black, Multipurpose Primer) is a specially formulated high performance bonding primer. It allows the speed of application of the bonding primer to be five times faster than conventional bitumen primers, promoting strong bonds at temperatures as low as 5°C. For self adhesive and torch applied bitumen membranes. IKOpro Quick Dry Primer.IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes. IKO Polimar FCS Asphalt & Bitumen Primer.IKO Polimar FCS Asphalt & Bitumen Primer is a 2- component, fast curing PMMA-based resin primer for use on bitumen and asphalt substrates in preparation for the application of IKO Polimar FCS system. IKO Polimar FCS Concrete Primer.IKO Polimar FCS Bitumen Primer is a fast curing PMMA-based primer on absorbent substrates in preparation for the application of IKO Polimar FCS system. |
Skirtings and vertical work | IKOpro Bonding Agent.for self adhesive bitumen membranes only IKOpro Sprayfast MPP.for self adhesive and torch applied bitumen membranes IKOpro Quick Dry Primer.for torch applied bitumen membranes IKO Polimar FCS Asphalt & Bitumen Primer.For priming and as a barrier coat on asphalt and bitumen substrates. IKO Polimar FCS Concrete Primer.For the priming of absorbent substrates such as concrete, screed and timber. |
Air and vapour control layer | IKO Ultra S-A Air and Vapour Control Layer.Self adhesive for combustible substrates S-A VCL (Self-Adhesive) is a high performance vapour barrier for use in adhered IKO Polymeric systems. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self-adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A selvedge of 75mm width, protected with release film, provides a quick means of completing side laps. IKO Ultra T-O Air and Vapour Control Layer.Torch applied to non combustible substrates only T-O VCL (Torch-on) is a high performance vapour control layer for use in adhered IKO Polymeric systems. It comprises an impervious aluminium core, reinforced with polyester and coated with a specially formulated quick melt SBS modified bitumen. The lower surface has a sacrificial film which rapidly melts during the torching operation. |
Insulation | - |
TypeIKO enertherm GOLD is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality rooftop insulation consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity. | IKO enertherm Gold Insulation, 2400 x 1200 mm.Thickness: 30, 50, 60, 80, 100, 120, 140, 150 mm. Consult literature and insert requirements. IKO enertherm Gold Insulation, 1200 x 1200 mm.Thickness: 30, 40, 50, 70, 80, 100, 120,140 mm. Consult literature and insert requirements. |
Fixing | IKOpro PU bonding adhesive.IKOpro Sprayfast IBA. |
Carrier membrane | - |
Type | IKO Ultra H-A Underlay.IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m. |
Liquid-applied waterproofing | - |
Type | IKO Polimar FCS Waterproofing reinforced with IKO 110 sgm Polyester Fleece.Polyester fleece: White, 1.05 x 50 m. |
Surface treatmentKO Polimar FCS (Fast Curing System) Sealer Coat is a flexible, UV-stabilized, two-component pigmented surface sealant, based on polymethyl methacrylate. | IKO Polimar FCS Sealer coat, RAL 7032.Optional and required for 25 year applications. IKO Polimar FCS Sealer coat, RAL 7030.IKO Polimar FCS Sealer coat, RAL 7043. |
Storage | Store products sealed in their original airtight container and in a cool, dry and frost-free place. The unopened product has a shelf life of at least 6 months after delivery. Direct sunlight on the containers should be avoided, including on site. |
Application temperature | Application can proceed when the air temperature is between +3°C and +35°C. |
Cold Applied Liquid System for Car Park Decks - IKO Polimar FCS
Cold Applied Liquid System for Car Park Ramps - IKO Polimar FCS
Fast Curing Cold Applied Liquid System for Car Parks - IKO Polimar FCS
Fast Curing Cold Applied Liquid System for Cold Roofs - IKO Polimar FCS
Single Component Cold Applied Liquid System for Warm Roofs - IKO Hybritech 1K PU - Waterproofing system
Single-Component Cold Applied Liquid System for Flat and Pitched Roofs - IKO Tanetech R EC/UV - Flat roof system
Two-Component Cold Applied Liquid System for Roofs, Balconies and Car Parks - IKO Metatech - Liquid Applied Waterproofing