Compare

Excel Warm Roof Single Layer System - Concrete Roof Slab (In-situ/ Pre-cast) / Timber Roof Deck / Profiled Metal Deck

Name: Excel Warm Roof Single Layer System - Concrete Roof Slab (In-situ/ Pre-cast) / Timber Roof Deck / Profiled Metal Deck
Brand: Axter Ltd
SKU: 5CRqVi7TnkGgksq9Rttxm7

Verified by manufacturer 3 months ago

Excel WR Single Layer System - Concrete Roof Slab (In-situ/ Pre-cast)

Axter Ltd

Third party certifications:

BBA Agrément Certificate
Certificate type
EPD
Certificate type

Single layer-layer, warm roof, Alpa polymeric binder, Reinforced Bitumen Membrane (RBM ) waterproofing system. Suitable for new build and refurbishment applications.

Jump to:

BOS

+44 (0)1473 724056 Website

Application

Suitable for new builds and refurbished construction projects, used as a single layer.

Description

Single-layer, torch-applied, warm roof, Alpa polymeric binder, reinforced bitumen membrane (RBM) waterproofing system. Suitable for new build and refurbishment applications.

The top surface is finished with coloured ceramic granules or mineral slate chippings, while the under surface is finished with a thermofusible film. Minimum selvedge width is 8 cm.

Features and benefits:

Application Flexibility: Torch applied and, mechanically fixed and flame free.
Membrane SP performance classification requirement in accordance with BS 8747 Table 5.
Classified unrestricted by the requirements of Part B of the National Building Regulations and deemed Broof(t4) in accordance with BS EN 13501-5:2005 fire classification of construction products and building elements.
BBA approved - certificate number 94/3037 PS1.
Exceptional aging characteristics in excess of 50 years in accordance with BS 8747 clause 4.9.6 Durability.
Zero fall accredited as stated in BBA Certificate 94/3037.
Manufactured within ISO 9001 and 14001 certified management systems.
Exclusive Alpa binder providing bond strength, flexibility and durability: creates a flexible and lightweight cap sheet allowing easy installation.
Accepted by all third party building warranty providers such as LABC and NHBC.

Application method:

Installed fully or partially bonded with fully sealed joints, using hot air fastening and torch-on techniques to form a continuous layer:

Hot air fastening.
Torch-on.

General information

Color	Black Guidance for specification option: Charcoal. Grey Guidance for specification option: Charcoal.
Finish	Mineral Guidance for specification option: Mineral slate chippings.
Material	Bitumen Guidance for specification option: Alpa® mix polymer modified membrane.
Shape	Other
Length	Bespoke
Width	Bespoke
Height	Bespoke
Warranty description	30 year Guidance for specification option: The Excel Multi layer warm roof system achieves an insurance backed guarantee of up to 30 years. Guarantee options are: Platinum Insurance Backed Guarantee ( Workmanship, Design, Materials, Installer Solvency Insurance). Goldshield Guarantee (Workmanship, Design, Materials). Silvershield Guarantee (Workmanship, Materials). Bronzeshield Guarantee (Materials).

Uniclass	Ss_30_40_30_72 Reinforced bitumen membrane warm roof covering systemsPrimary
CAWS	J41/10 Reinforced bitumen membrane warm deck roof covering J41/110 Built-up reinforced bitumen membrane warm deck roof covering

Product range	EXCEL®

Specification data - Reinforced bitumen membrane warm roof covering systems

Preparation	-
Horizontal work	Vernis Antac primer. Guidance for specification option: Solvent-based, rapid drying bituminous primer specially modified with an adhesive. The product is supplied ready to use. Priming of concrete, timber or metal roof deck/ slabs in preparation for receiving bituminous membranes. Average consumption: 150–300 g/m². Application method is by brush or roller, on dry, clean surface. Allow to dry completely before applying waterproofing membranes. Drying time: 60 to 90 minutes, depending on weather conditions.
Air and vapour control layer	-
Type	Roll 25 Alpa Alu. Guidance for specification option: Glass-fibre/ aluminium reinforced bitumen air and vapour control layer with ALPA binder. It has semi-continuous strips of self-adhesive bitumen on the surface, protected by a thermofusible film, and a thermofusible film on the undersurface. Once installed, the product provides a temporary waterproofing layer, allowing internal works to be carried out immediately. Width: 1 m. Length: 7 m. Weight per m²: 3.1 kg/m².
Insulation	-
Type	Hytherm BF. Guidance for specification option: Designed to provide optimum stability and structural integrity. Type: Fibre-free, rigid polyisocyanurate (PIR). Facing: Top: coated glass tissue facing on one side. Underside: bitumen glass tissue with polypropylene fleece. Standard board sizes:1200 x 600 mm. Standard board thickness: 30mm – 150 mm. Thermal conductivity: 0.26W/m.K - 0.024W/m.K. Compressive strength: >150kPa at 10% compression.
Fixing	Hyrastik EVO. Guidance for specification option: Single-component, moisture-curing polyurethane insulation adhesive.
Waterproof covering	-
First layer	-
Type	Hyranger TS CPV. Guidance for specification option: HYRANGER TS CPV is a stabilised polyester reinforced SBS elastomeric modified bitumen waterproofing membrane. It can be used as a base or intermediate layer of multi-layer waterproofing system for flat roofs. It can also be used as the top layer under site applied added protection.
Top layer	-
Type	Excel Capping Sheet. Guidance for specification option: Torch-applied, reinforced Alpa Polymer, modfied self-finished bitumen waterproofing membrane. Width: 1 m. Length: 8 m. Weight: 5 kg/m². Surface: top: Mineral slate or granules 100–1200 g/m²; bottom: thermofusible film 10 g/m². Reinforcement binder: Alpa – mix 3500 g/m². Cold bending test: ≤-14°C. Softening point: ≥120°C. Tensile strength: length 600 N/50 mm; transverse >600 N/50 mm. Elongation at break: length >35%; transverse >35%.
Attachment	Flame free hot air welded. Torch-on. Manufacturer guidance Installed fully or partially bonded with fully sealed joints, using the fastening techniques to form a continuous layer.
Detail work	-
Flashings	35 PY Angle Reinforcement. Guidance for specification option: 35 PY ANGLE REINFORCEMENT is a polyester reinforced SBS elastomeric membrane. Minimal thickness is 3.5 mm. Hyranger Spot ADH.
Skirtings and upstands	35 PY Angle Reinforcement. Guidance for specification option: Polyester reinforced SBS elastomeric membrane. Minimal thickness is 3.5 mm. 10 x 0.25 m with an average weight of 11 kg . 10 x 0.33 m with an average weight of 15 kg. Axter 35 PY Angle Reinforcements fully bonded in accordance with Axter Ltd recommendations.
Ancillary items	Axtrim. Guidance for specification option: Manufactured from extruded aluminium alloy to BS 1474, Quality 6065/ T6 (AIMgSi 0.5 F22). Roof edge trim brings a neat finish to flat roof waterproofing. Axtrim aluminium termination bars. Guidance for specification option: Axtrim aluminium termination bars are manufactured from extruded aluminium alloy to BS 1474, Quality 6065/ T6 (AIMgSi 0.5 F22). Aluminium termination bars will not rust and are not affected by atmospheric pollution. They are colourfast and maintenance free, once installed. Axtrim GRP termination bars. Guidance for specification option: Axtrim GRP termination bars are manufactured from pultruded GRP (glass reinforced polyester). It is UV protected and has low coefficient of thermal expansion. GRP termination bars will not rust and are not affected by atmospheric pollution. They are colourfast and maintenance free, once installed. Rainwater outlets. Guidance for specification option: Axter rainwater outlets are manufactured from 0.7 mm stainless steel in a choice of diameters, with a factory bonded flange, if required to provide a bonding area with the relevant Axter waterproofing system. SBS bitumen membrane flange 500 mm square, suitable for use with the full range of Axter reinforced bitumen membrane (RBM) and hot melt structural waterproofing systems. On the Dual Outlet, a bitumen flange is fitted at AVCL level. PVC membrane flange 350 mm square, suitable for use with Axter Ecoflex/ Ecoline PVC single ply waterproofing systems. Sump outlet. Guidance for specification option: Specifically designed for through walls applications or parapets, where a high flow rate is required and are supplied with the Hyflow leaf guard as standard. AXTER sump outlet has a flow rate of 6.1 L/s. As recommended by UK design standard BS EN 12056: 3-2000, with a water depth of 35 mm. Wide parapet outlet. Guidance for specification option: Used where an increased flow rate (2.02 L/s) is required. A 90° pipe angle and extra-large leaf guards are also available to be used with this unit. Universal leaf guard. Guidance for specification option: The solid stainless steel universal leaf guard clamps to the inside of the outlet stem. Suits all sizes of rainwater outlets. Parapet leaf guard. Guidance for specification option: The solid parapet leaf guard is attached to the inside of the outlet and is fully adjustable to fit all three parapet outlet sizes. Hyflow leaf guard. Guidance for specification option: The 1.4301 (304) grade stainless steel Hyflow leaf guard is designed to be used with Axter rainwater outlets. Its use increases flow rate by over 50% compared to standard leaf guards.
Surface protection	Self Protected Excel Capping Sheet.
System accessories	Lightning conductor clips. Guidance for specification option: Axter lightning conductor clips provide resilience and repellent characteristics, keeping them from fading and going brittle in sunlight. Simple to install and are supplied as a one-piece unit. Colour is dark grey. Rooflights/ access hatches. Guidance for specification option: Consult manufacturer for details. Solar PV Flex. Guidance for specification option: Flexible thin-film photovoltaic system combining CIGS (Copper Indium Gallium Selenide) panels bonded to Axter waterproofing membrane Axter SOLAR PVFLEX flexible. Thin-film photovoltaic system is a lightweight integrated solution, where the solar PV module and the waterproofing are combined, and the PV module is secured to the roof system without the need for mechanical restraint and penetration of the waterproofing layer.
Execution	- Manufacturer guidance Where required installed to a zero fall or laid to falls. All in accordance with the manufacturer’s guidance, third party certification and British Standard documentation BS 6229: 2018. The structural deck must be clean and dry with moisture content below 6%. The deck should be cleaned ensuring the removal of all dust and loose material using approved methods. Please refer to Axter Ltd substrate preparation document for further guidance.
System completion	Interim and final roof inspections by AXTER Quality Assurance (QA) personnel. Final roof inspections by AXTER Quality Assurance (QA) personnel are mandatory for guarantee application.

Certification	BBA approved, accepted by all third party building warranty providers such as LABC and NHBC. Fully compliant with The Building Regulations and all relevant British and harmonized European standards.
Structure	Concrete Roof Slab (In-situ/ Pre-cast). Manufacturer guidance Reinforced bitumen membranes should only be applied over a continuous substrate which provides full support. Support structure materials used to form the roof deck in flat roofs should be those listed in BS 6229: 2018, and conform to the relevant requirements in BS 8217: 2005.
Underlayer	Hyranger Spot ADH. Guidance for specification option: Self-adhesive, stabilized polyester, reinforced SBS elastomeric modified bitumen waterproofing membrane. The under surface is covered with a peel-off film. The under surface and side lap are self-adhesive. Width: 1 m. Length: 10 m. Thickness (finished product): 2.65 mm. Surface finish (bottom): Thermofusible polyethylene. Weight (nominal roll weight): 31.6 kg. Tensile strength: ≥1200 N/50 mm (length and diagonal). Heat stability: +100°C. Cold bending test: ≤-14°C. Elongation at break: ≥2% (length and diagonal).
Fire performance	Unrestricted to NBR – Part B and Broof(t4) to BS EN 13501-5: 2005. Guidance for specification option: Classified unrestricted by the requirements of Part B of the National Building Regulations and deemed Broof(t4) in accordance with BS EN 13501-5:2005 fire classification of construction products and building elements.
Finish layer	Bonded surface decorative aggregates. Loose surfacing decorative aggregates. Reinforced bitumen roofing sheets. Pavers on supports. Dalle Ceramic Tiles on Axter adjustable paving supports. Stone ballast. Show more

Sustainability data

Material	Bitumen Guidance for specification option: Alpa® mix polymer modified membrane.
Recyclability	Guidance for specification option: 100% of polymer modified bitumen membrane production waste is recycled and taken for re-use in the manufacture of asphalt. Manufacturer guidance The products comprise bituminous compounds, mineral aggregates and glass /polyester, which can be recycled. 100% recyclable except for aluminium membranes ( the aluminum would have to be removed). They can either be burned to recuperate the energy produced, or ground down to add them into membranes or shingles or into roads.
Recycled content As defined in clause 7.8 of BS EN ISO 14021	10 % Guidance for specification option: Minimum content