ES600 Moisture Vapour Suppressant - Subfloor Moisture Vapour Suppressant
Verified by manufacturer 2 days ago
Ready for use, one part, water-based moisture vapour suppressant.
Application
Suitable for use to suppress residual construction moisture in cementitious subfloors, including power floated concrete and sand/ cement screeds.
Description
Ready for use, one part, water-based moisture vapour suppressant.
Complies with the requirements of BREEAM; EN 13999.
Features and benefits:
- Guarantees the early satisfactory laying of floor coverings to sand/ cement and concrete bases where moisture content is up to 95% relative humidity (RH).
- Rapid drying - Approximately one hour at 20°C.
- Easy to apply – primerless application and single component, no mixing required.
- Water-based, low VOC compliant.
- Suitable for heated concrete and sand cement screeds (provided the surface temperature does not exceed 27°C in accordance with BS 8203 and BS 5325).
All aspects of the installation must be in accordance with the requirements of BS 8204, BS 8203 (Installation of Resilient Floor Coverings) or BS 5325 (Installation of Textile Floor Coverings) and supplementary specifications.
See manufacturer's datasheet for preparation and application requirements.
General information
Color | Black Guidance for specification option: Dark grey emulsion when wet, black when dry. |
Material | Polymer Water-based |
Shape | Formless |
Warranty description | Other Guidance for specification option: Tremco CPG UK Limited products are manufactured to rigid standards of quality. Any product which has been applied (a) in accordance with Tremco CPG UK Limited written instructions and (b) in any application recommended by Tremco CPG UK Limited, but which is proved to be defective, will be replaced free of charge. |
Uniclass | |
CAWS | M1/358 Plaster surface sealant M10/680 Surface sealer to wearing screeds |
SKU Code | ES600 |
Specification data - Cement-based screed surface sealers
Classification data | |
Material | Water-based, modified synthetic polymer emulsion. |
Total VOCs (maximum) | EMICODE EC1. |
Coverage | Two coats will cover up to 16 m² per 5 kg unit. Guidance for specification option: Consult manufacturer for details. |
Density | 1.0 kg/L. Manufacturer guidanceAt +25°C. |
Drying time | One hour. Manufacturer guidanceAt 20°C. |
Sustainability data
Material | Polymer Water-based |