Verified by manufacturer 5 months ago
Epoxy Gloss Coat
A tough epoxy water based coating with a gloss, matt or hygienic finish.
Mixing
Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue). Mix the components together thoroughly using a spatula or similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin.
Watco Epoxy Gloss/ Matt Coat Application
Epoxy Gloss Coat:
Watco Epoxy Gloss Coat has been re-formulated to produce a ‘Best in Class’ water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. The blend of the resins available with a ‘diamond hard’ wax and ceramic additive provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts.
Epoxy Matt Coat:
A tough two pack epoxy paint with a matt finish. Ideal for floors with imperfections as the matt finish will hide these.
Epoxy Gloss Coat Hygienic:
Tough, hard wearing glossy floor finish for medium to heavy wear areas, ideal for areas where hygiene is important.
Epoxy Matt Coat Hygienic:
Tough, hard wearing Matt floor finish for medium to heavy wear areas, ideal for areas where hygiene is important.
Features and benefits:
Epoxy Gloss Coat:
Epoxy Matt Coat:
Epoxy Damp Proof Membrane:
Epoxy Gloss Coat Hygienic:
Epoxy Matt Coat Hygienic:
Color | Yellow Red Blue Green Grey |
Finish | Gloss Matt Smooth |
Material | Epoxy resin Guidance for specification option: Virtually solvent free, high solids epoxy resin. |
Uniclass | |
CAWS | M60/180 Floor coating |
Product range |
Colour | Yellow.Red.Blue.Green.Grey.Black.White. |
Execution | Primer dry film thickness (dft). |
Dry film thickness | 250 microns. |
Wet film thickness (minimum) | 250 microns. |
Components | 100 parts resin : 50 parts curing agent. |
Abrasion resistance | 147 mg. Guidance for specification option: To ISO 5470-1. |
Flexibility | 2 mm. Guidance for specification option: To ISO 1519. |
Adhesion | 2.8 MPa/N mm². Guidance for specification option: To EN 1542. |
Volatile organic compound (VOC) level | 30 g/L. |
Finishes | Glossy, smooth. |
Composition | Two part reinforced water based epoxy resin. |
Country of product manufacture | United Kingdom |