This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more
Epoxicote High Build Primer Verified by manufacturer 3 months ago
Verified by manufacturer 3 months ago
An epoxy resin primer for bare concrete.
Application
- For use on hard, smooth, power floated concrete which would otherwise reject a paint coating; and on weaker, porous bare concrete surfaces.
- Suitable for priming any bare concrete surface before applying Watco EpoxicoteTM High Build.
Description
When a high build coating is applied to a porous unsealed concrete surface, air can become trapped in the coating during application and cure leading to bubbles in the finished floor. This epoxy resin primer prevents this from occurring.
Features and benefits:
- Primes hard, smooth or power floated concrete ready for painting.
- Seals porous concrete to prevent air entrapment (bubbles) in new paint coating.
- One coat application – quick and easy to apply.
- Low odour, two-part, water-based epoxy resin.
- Ready for overcoating with Watco EpoxicoteTM High Build after 12 hours at 20°C.
General information
Color | Grey |
Finish | Matt |
Material | Epoxy resin Water based. |
Size | 3 L |
Uniclass | |
CAWS | M12/12 Resin flooring M12/110 Resin flooring |
Product range |
Specification data - Primer-sealers
Composition | Water-based. |
Execution | Primer dry film thickness (dft). |
Product Reference | Epoxicote High Build Primer |
Dry film thickness | 120 microns. |
Wet film thickness (minimum) | 160 microns. |
Coverage | 18 m² per 3 L. |
Abrasion resistance | 82 mg. To ISO 5470-1. |
Adhesion | 3.4 MPa/Nmm². To EN 1542. (Class 0 to ISO 2409). |
Impact resistance | Class 3. To ISO 6272. |
Flexibility | 2 mm. To ISO 1519. |
Volatile organic compound (VOC) level | 10 g/L. |
Literature
Data Sheet: Epoxicote High Build Primer
Similar products from Watco UK Ltd
Epoxy Gloss Coat & Epoxy Matt Coat
New Concrete Primer
Oil Block Primer
Polyaspartic Primer
Powerfloat Primer & Rapid