Electrak Underfloor Power
Verified by manufacturer 26 days ago
Electrak 24 Standard system (white)
Electrak 24 Standard system (white)
EPD
Certificate type
Underfloor busbar for cavity floor installations.
Application
Suitable for cavity floor installations.
Description
Electrak powertrack/ underfloor busbar is suitable for cavity floor installations. With minimal parts, push-fit assembly and a complementary range of floor boxes and grommets, this flexible, easy-to-install system can be reconfigured as office layouts evolve. The system consists of continuous lengths of track which are fed via a feed unit and can be installed in floor voids as low as 48 mm.
Features and benefits:
- 63 A rated, IP 40 protection.
- Available in five versions: single phase, clean earth, dual circuit, three phase and auxiliary earth.
- Available in 1.2 m, 1.8 m, 2.4 m and 3.6 m lengths.
- Tap-off outlets are located at every 300 or 600 mm pitch.
- Floor mountable (stand-off brackets also available).
General information
Color | White Green Grey Red |
Finish | Galvanized |
Material | Steel Polycarbonate |
Shape | Rectangle |
Length | 1200 mm 1800 mm 2400 mm 3600 mm |
Width | 99 mm |
Height | 47 mm |
Warranty description | Two year |
Uniclass |
Specification data - Powertrack
Classification data | |
Standards | To BS EN 61534-22 and BS 7671. |
Rated current (InA) | 63 A. |
Rated operational voltage (Ue) | 230/ 400 V a.c. |
Rated impulse withstand voltage (Uimp) | 4000 V. Guidance for specification option: Category III. |
Configuration | Single-sided. |
Length | 1200 mm. Guidance for specification option: Four outlets. 1800 mm. Guidance for specification option: Six outlets. 2400 mm. Guidance for specification option: Eight outlets. 3600 mm. Guidance for specification option: 12 outlets. |
Tap-off points | At 300 mm intervals. At 600 mm intervals. |
Resistance to impact (minimum) | 5 J. |
Resistance to floor maintenance | Suitable for dry treatment of floor. |
Installation position | Underfloor. |
Tap-off units | 32 A unfused 16 mm Ø L, N, PE. 13 A fused 16 mm Ø L, N, PE. 13 A 543·7 fused 16 mm Ø L, N, PE. |
Enclosure | |
Ingress protection (minimum) | IP40. |
Material | Sheet steel. |
Finish | Galvanized. |
Colour | Grey. |
Pollution degree category | 2. |
Conductors | Insulated copper. |
Accessories | Track feed unit and flexible interlinks. |
Service conditions | Normal. |
Support | Integral floor fixing brackets. Guidance for specification option: As standard. Special fixing brackets. Guidance for specification option: Required when track is raised off surface level. Brackets raise track by 21 mm and should be spaced 600 mm apart. |
Sustainability data
Material | Steel Polycarbonate |
Product certifications
Product certifications
EPD
Product Environmental Profile Electrak® powertrack system
Case studies
Legrand takes on the challenge at Microgaming HQ