Ecopad Thermal Break - A2 Fire Rated Thermal Break
Verified by manufacturer 2 months ago
A2 fire-rated thermal break providing low thermal conductivity and high compressive strength.
Application
Thermal break for use between flanged vertical and horizontal connections; compliant for use on buildings over 11 metres. Suitable for use with:
- Steel to steel, masonry/ concrete or timber.
- Concrete to concrete.
- Between structural frames.
- Façade system connections to substrate.
- In isolation of sub-structure and basement elements.
- Roof parapets.
- Canopies.
- Balconies.
- External access systems.
- With roof plant enclosures.
- Through connections to existing substructures.
- In connection of external and internal primary building elements.
Description
A2 fire-rated thermal break providing low thermal conductivity and high compressive strength between flanged vertical and horizontal connections.
Features and benefits:
- Made of reinforced fire-resistant 5 mm-thick thermoset resin.
- Maintains its structural integrity in the event of fire.
- Low heat conductivity.
- Low water absorption.
- Good hydrocarbon stability.
- Good chemical stability.
- Excellent mechanical durability.
- Meets multiple requirements of designers by providing all the necessary properties in one thermal break product.
- Under “Document B Building Regulations” , this material is compliant for use on buildings over 11 metres.
- Suitable for use with a wide range of substrates/ systems.
- Independently tested and meets following industry standards:
- Can be supplied as cut pads to fit in any shape within the parameters of the material.
- A2 fire rated non-combustible.
- Very high structural performance and compressive strength (EN ISO 604).
General information
Color | Gold Guidance for specification option: Brass. |
Material | Resin Guidance for specification option: Thermoset. |
Shape | Rectangle |
Uniclass | |
CAWS | E40/448 Thermal break connection plates E40/448 Thermal break connection plates |
Specification data - Thermal break connection plates
Certification | Manufacturer's standard.Guidance for specification option: Test reports available for compression and to EN 1602, EN 12087 and EN 12664. |
Material | Thermoset resin. |
Dimensions | |
Length | Guidance for specification option: Insert requirements. |
Width | Guidance for specification option: Insert requirements. |
Thickness (maximum) | 5 mm.Guidance for specification option: Tolerance: ±0.5 mm. |
Thickness (minimum) | 5 mm.Guidance for specification option: Tolerance: ±0.5 mm. |
Compressive stress (maximum) | To EN ISO 604, 700 MPa. |
Operating temperature (maximum) | Manufacturer's standard. |
Operating temperature (minimum) | Manufacturer's standard. |
Holes | Guidance for specification option: Insert requirements (number and sizes). |
Elastic modulus | To EN ISO 604, 5819 MPa. |
Thermal Conductivity: | To DIN 52 612: 0.2082 W/m·K. |
Fire rating | To EN 13501-1, A2. |
Density | To ISO 1183, 2085 kg/m³. |
Body colour | Brass. |
Literature
Ecopad Data Sheet