Compare

Durapipe Hot and Cold HTA System - Solvent Weld Fittings

Name: Durapipe Hot and Cold HTA System - Solvent Weld Fittings
Brand: Aliaxis
SKU: 6oviAER3arWnh3UappXW14

Verified by manufacturer 4 months ago

PN25

Aliaxis

Third party certifications:

WRAS
Certificate type

The HTA solvent weld system is fully WRAS-approved for transporting hot and cold water. The range is complete with fittings, pipe and accessories such as valves, expansion compensators and clips

Jump to:

+44 (0) 330 111 4233 Website

Application

HTA is primarily for use in hot and cold water systems however it can also be used in heating systems where the temperature does not exceed 60 degrees C - such as with air source heat pumps and low temperature heating.

Description

HTA pipe is WRAS compliant and manufactured to a high level of industry standards. The smooth bore of HTA helps to generate energy savings by maintaining excellent pump efficiencies throughout its use. With no threat of corrosion, HTA pipes can also significantly reduce the costs of maintenance throughout the 50-year design life of the system.

A safe, simple and fast method of creating robust, permanent joints, HTA solvent weld fittings are fully WRAS approved for transporting hot and cold water. No specialist tools, electricity or hot works are required when joining HTA, this alongside the speed of installation can offer significant time and cost savings on site.

Features and benefits:

Up to 16 bar pressure rating (32–160 mm).
Up to 25 bar pressure rating (16–63 mm).
No hot works required.
Completely corrosion resistant.
Fully WRAS approved.
50-year design life.
Sizes 16 to 160 mm (DN10–150).
Pipe marking to differentiate PN16 and PN25.

General information

Color	Brown
Finish	Smooth
Material	Chlorinated polyvinyl chloride (PVC-C)
Shape	Circle
Length	3000 mm Guidance for specification option: In sizes 16mm to 50mm 4000 mm Guidance for specification option: In sizes 63mm to 160mm
Width	16 mm Guidance for specification option: PN25 only 20 mm Guidance for specification option: PN25 only 25 mm Guidance for specification option: PN25 only 32 mm Guidance for specification option: PN16/PN25 40 mm Guidance for specification option: PN16/PN25 50 mm Guidance for specification option: PN16/PN25 63 mm Guidance for specification option: PN16/PN25 75 mm Guidance for specification option: PN16 only 90 mm Guidance for specification option: PN16 only 110 mm Guidance for specification option: PN16 only 125 mm Guidance for specification option: PN16 only 160 mm Guidance for specification option: PN16 only Show more
Height	16 mm Guidance for specification option: PN25 only 20 mm Guidance for specification option: PN25 only 25 mm Guidance for specification option: PN25 only 32 mm Guidance for specification option: PN16/PN25 40 mm Guidance for specification option: PN16/PN25 50 mm Guidance for specification option: PN16/PN25 63 mm Guidance for specification option: PN16/PN25 75 mm Guidance for specification option: PN16 only 90 mm Guidance for specification option: PN16 only 110 mm Guidance for specification option: PN16 only 125 mm Guidance for specification option: PN16 only 160 mm Guidance for specification option: PN16 only Show more
Warranty description	15 year Guidance for specification option: 15-year full system warranty once the installation has been approved by Aliaxis; consult manufacturer for details.

Uniclass	Pr_65_52_63_14 Chlorinated polyvinyl chloride (PVC-C) pipelinesPrimary
CAWS	S90/540 Thermoplastics pipework S90/150 Indirect hot water storage supply S90/140 Direct hot water storage supply S90/130 Instantaneous hot water supply S90/120 Storage cold water supply S90/110 Mains cold water supply

Product range	Hot and Cold Water Distribution Systems

Specification data - Chlorinated polyvinyl chloride (PVC-C) pipelines

Standards	-
Pipe	To NF EN 15877. Guidance for specification option: Consult manufacturer for full list of physical characteristics and relevant standards.
Fittings	To NF EN 15877. Guidance for specification option: Consult manufacturer for full list of physical characteristics and relevant standards.
Third-party certification	WRAS-approved.
Pressure rating	PN25.
Colour	Brown.

Jointing	Solvent weld.
Nominal sizes	16 mm (DN10). Guidance for specification option: Pipe diameter: 16 mm (internal diameter: 12.4 mm). Pipe wall thickness: 1.8 mm. 20 mm (DN15). Guidance for specification option: Pipe diameter: 20 mm (internal diameter: 15.4 mm). Pipe wall thickness: 2.3 mm. 25 mm (DN20). Guidance for specification option: Pipe diameter: 25 mm (internal diameter: 19.4 mm). Pipe wall thickness: 2.8 mm. 32 mm (DN25). Guidance for specification option: Pipe diameter: 32 mm (internal diameter: 24.8 mm). Pipe wall thickness: 3.6 mm. 40 mm (DN32). Guidance for specification option: Pipe diameter: 40 mm (internal diameter: 31 mm). Pipe wall thickness: 4.5 mm. 50 mm (DN40). Guidance for specification option: Pipe diameter: 50 mm (internal diameter: 38.8 mm). Pipe wall thickness: 5.6 mm. 63 mm (DN50). Guidance for specification option: Pipe diameter: 63 mm (internal diameter: 48.8 mm). Pipe wall thickness: 7.1 mm. Show more Manufacturer guidance Consult manufacturer's literature for further details.
Bends	90° elbow: female. Guidance for specification option: Insert required pipe size(s) including drawing reference or schedule as required. 45° elbow: female. Guidance for specification option: Insert required pipe size(s) including drawing reference or schedule as required. Elbow with brass thread: female – female; female thread. Guidance for specification option: G½". Insert requirements; sizes available: 32 mm; 40 mm; 50 mm; 63 mm. 90° bend: female - female. Guidance for specification option: Insert requirements. Sizes available: 20 mm; 25 mm; 32 mm; 40 mm; 50 mm. Manufacturer guidance Consult manufacturer's literature for further details.
Adaptors	Male brass threaded adaptor, Type A: female or male; male thread. Guidance for specification option: Insert requirements. Sizes available: 16 mm to 3/8"; 20 mm to ½"; 25 mm to ¾"; 32 mm to 1"; 40 mm to 1¼"; 50 mm to 1½"; 63 mm to 2"; 75 mm to 2½"; 90 mm to 3". Male brass threaded adaptor, Type B; female or male; male thread. Guidance for specification option: Insert requirements. Sizes available: 16 mm to ½"; 20 mm to ¾"; 25 mm to 1"; 32 mm to 1¼"; 40 mm to 1½"; 50 mm to 2". Female brass threaded adaptor: female or male; male thread. Guidance for specification option: Insert requirements. Sizes available: 16 mm to G3/8"; 20 mm to G½"; 25 mm to G¾"; 32 mm to G1"; 40 mm to G1¼"; 50 mm to G1½"; 63 mm to G2"; 75 mm to G2½"; 90 mm to G3". Three-piece male brass threaded union: female; male threaded. Guidance for specification option: Insert requirements. Sizes available: 16 mm to G3/8"; 20 mm to G½"; 25 mm to G¾"; 32 mm to G1"; 40 mm to G1¼"; 50 mm to G1½"; 63 mm to G2". Three-piece female brass threaded union: female; female threaded. Guidance for specification option: Insert requirements. Sizes available: 16 mm to G3/8"; 20 mm to G½"; 25 mm to G¾"; 32 mm to G1"; 40 mm to G1¼"; 50 mm to G1½"; 63 mm to G2". Elbow with brass thread: female–female, female thread. Guidance for specification option: Insert requirements. Sizes available: 16 mm (DN10); 20 mm (DN15); 25 mm (DN20); 32 mm (DN25). 90° brass threaded elbows: female; female threaded. Guidance for specification option: Insert requirements. Sizes available: 16 mm to G½"; 20 mm to G½"; 25 mm to G¾". Wall-mounted elbow with female brass thread: female; female threaded. Guidance for specification option: Insert requirements. Sizes available: 16 mm to G½"; 20 mm to G½"; 25 mm to G¾". Connection socket with EPDM seal, EPDM gasket and brass nut: male; female threaded. Guidance for specification option: Insert requirements. Sizes available: 16 mm to G½"; 20 mm to G¾"; 25 mm to G1". 32 mm to G1¼". 40 mm to G1½". 50 mm to G2". Stainless steel male threaded adaptor - 316L: female or male; male threaded. Guidance for specification option: Insert requirements. Sizes available: 20 mm to ½"; 25 mm to ¾"; 32 mm to 1". 90° threaded equal tee (metal reinforcing ring): female; female threaded. Guidance for specification option: Insert requirements. Sizes available: 16 mm to G½"; 20 mm to G½"; 25 mm to G¾". CPVC male threaded adaptor: female; male threaded. Guidance for specification option: Insert requirements. Sizes available: Type A: 20 mm to ½"; 25 mm to ¾"; 32 mm to 1"; 40 mm to 1¼"; 50 mm to 1½"; 63 mm to 2". Type B: 16 mm to ½"; 25 mm to 1"; 32 mm to 1¼"; 40 mm to 1½"; 50 mm to 2". Female threaded adaptor with metal reinforcing ring: female or male; female threaded. Guidance for specification option: Insert requirements. Sizes available: 20 mm to G½"; 25 mm to G¾". 32 mm to G1"; 40 mm to G1¼". 50 mm to G1½"; 63 mm to G2". Three-piece composite union: female – female. Guidance for specification option: Insert requirements. Sizes available: 16 mm; 20 mm; 25 mm; 32 mm; 40 mm; 50 mm; 63 mm. Three-piece threaded composite union: female – male thread. Guidance for specification option: The three-piece H3F/P unions are female socketed with a male conical thread. H3F/P parts can be connected to C-PVC and metal parts (brass. cast iron. stainless steel. steel). For mounting H3F/P. use PTFE tape excluding any wire or similar products. A sealing paste compatible with CPVC can be used if required. The thread is tapered. Insert requirements. Sizes available: 16 mm to ½"; 20 mm to ½"; 20 mm to ¾"; 25 mm to ¾"; 25 mm to 1". Flexible hose adaptor: male - female. Guidance for specification option: Insert requirements. Sizes available: 16 mm; 20 mm; 25 mm; 32 mm; 40 mm; 50 mm. Endcaps: female. Guidance for specification option: Insert requirements. Sizes available: 16 mm; 20 mm; 25 mm; 32 mm; 40 mm; 50 mm; 63 mm 75 mm; 90 mm; 110 mm; 125 mm; 160 mm. Threaded spigot adaptors: male - female threaded. Guidance for specification option: Insert requirements. Sizes available: 25 mm to G½"; 32 mm to G¾". Half coupler. Guidance for specification option: Insert requirements. Sizes available: DN25; DN32; DN40; DN50; DN63. Show more
Adaptors and reducers	90° reducing tee: female. Guidance for specification option: Insert requirements. Sizes available: 20-16 mm (DN15-10); 25-16 mm (DN20-10); 25-20 mm (DN20-15); 32-16 mm (DN25-10); 32-20 mm (DN25-15); 32-25 mm (DN25-20); 40-20 mm (DN32-15); 40-25 mm (DN32-20); 40-32 mm (DN32-25); 50-20 mm (DN40-15); 50-25 mm (DN40-20); 50-32 mm (DN40-25); 50-40 mm (DN40-32); 63-20 mm (DN50-15); 63-25 mm (DN50-20); 63-32 mm (DN50-25); 63-40 mm (DN50-32); 63-50 mm (DN50-40); 75-20 mm (DN65-15); 75-25 mm (DN65-20); 75-32 mm (DN65-25); 75-40 mm (DN65-32); 75-50 mm (DN65-40); 75-63 mm (DN65-50); 90-32 mm (DN80-25); 90-40 mm (DN80-32); 90-50 mm (DN80-40); 90-63 mm (DN80-50); 90-75 mm (DN80-63); 110-40 mm (DN100-32); 110-50 mm (DN100-40); 110-63 mm (DN100-50); 110-75 mm (DN100-65); 110-90 mm (DN100-80). Reducer: male – female. Guidance for specification option: Insert requirements. Sizes available: 20-16 mm (DN15-10); 25-20 mm (DN20-15); 32-25 mm (DN25-20); 40-32 mm (DN32-25); 50-40 mm (DN40-32); 63-50 mm (DN50-40); 75-63 mm (DN65-50); 90-75 mm (DN80-65); 110-90 mm (DN100-80); 125-110 mm (DN110-100). Male reducer: male – female. Guidance for specification option: Insert requirements. Sizes available: 25-16 mm (DN20-10); 32-16 mm (DN25-10); 32-20 mm (DN25-15); 40-16 mm (DN32-10); 40-20 mm (DN32-15); 40-25 mm (DN32-20); 50-20 mm (DN40-15); 50-25 mm (DN40-20); 50-32 mm (DN40-25); 63-20 mm (DN50-15); 63-25 mm (DN50-20); 63-32 mm (DN50-25); 63-40 mm (DN50-32); 75-20 mm (DN65-15); 75-25 mm (DN65-20); 75-32 mm (DN65-25); 75-40 mm (DN65-32); 75-50 mm (DN65-40); 90-25 mm (DN80-20); 90-32 mm (DN80-25); 90-40 mm (DN80-32); 90-50 mm (DN80-40); 90-63 mm (DN80-50); 110-50 mm (DN100-40); 110-63 mm (DN100-50); 110-75 mm (DN100-65); 125-90 mm (DN110-80); 160-75 mm (DN150-65); 160-90 mm (DN150-80); 160-110 mm (DN150-100); 160-125 mm (DN150-110). Concentric reducer: male – female. Guidance for specification option: Insert requirements. Sizes available: 90-25 mm (DN80-20); 90-32 mm (DN80-25); 125-63 mm (DN110-50); 125-75 mm (DN110-65); 160-110 mm (DN150-100); 160-125 mm (DN150-110). 90° threaded reducing tee: female – female; female thread. Guidance for specification option: Insert requirements. Sizes available: 32 mm/ G½"; 40 mm/ G½"; 50 mm/ G½"; 63 mm/ G½"; 32 mm/ G¾"; 40 mm/ G¾"; 50 mm/ G¾"; 63 mm/ G¾". 90° threaded reducing tee (metal reinforcing ring): female – female; female thread. Guidance for specification option: Insert requirements. Sizes available: 40 mm/ G¾"; 50 mm/ G¾"; 63 mm/ G¾". Show more Manufacturer guidance Consult manufacturer's literature for further details.
Pipe couplings	Socket, female. Guidance for specification option: Insert required pipe size(s) including drawing reference or schedule as required. 90° equal tee. Guidance for specification option: Insert required pipe size(s) including drawing reference or schedule as required. Manufacturer guidance Consult manufacturer's literature for further details.
Fittings	Nipples: male - male. Guidance for specification option: Insert requirements. Available in all pipe sizes. Stub flange, serrated: female. Guidance for specification option: Insert requirements. Available in all pipe sizes 25 mm and larger. Thermal movement compensator. Guidance for specification option: Insert requirements; sizes available: 32 mm; 40 mm; 50 mm; 63 mm. Quick connect brass fitting. Guidance for specification option: Insert requirements; sizes available: 16 mm; 20 mm; 25 mm; 32 mm; 40 mm; 50 mm; 63 mm. Straub Plastgrip mechanical coupler. Guidance for specification option: Insert requirements; sizes available: 40 mm; 50 mm; 63 mm; 75 mm; 90 mm. Flange kit. Guidance for specification option: Each kit comprises two flange, two backing rings and an appropriate number of bolts & washers. Insert requirements; to suit pipe sizes 40 mm and larger. Flexible hose. Guidance for specification option: Hose with brass ends: male thread with loose nut. Insert requirements; sizes available: 16 mm - G½"; 20 mm - G½"; 25 mm - G¾"; 32 mm - G1"; 40 mm - G1¼"; 50 mm - G1½". Viton flat gasket. Guidance for specification option: Insert requirements, available to suit: DN15; DN20; DN25; DN32; DN40; DN50; DN65; DN80; DN100; DN125; DN150; DN200. EPDM flat gasket. Guidance for specification option: For serrated edges. Insert requirements, available to suit: DN15; DN20; DN25; DN32; DN40; DN50; DN65; DN80; DN100; DN125; DN150; DN200. Show more
Pipe collar	MONOKILP® collars. Guidance for specification option: Consult manufacturer's literature for options and insert requirements. Wedges for MONOKLIP® collars. Guidance for specification option: Consult manufacturer's literature for options and insert requirements.
Accessories	Instrumentation thermo-coupler for contact thermometer: female–female. Guidance for specification option: Insert requirements. Sizes available: 16 mm (DN10); 20 mm (DN15); 25 mm (DN20); 32 mm (DN25). Instrumentation tee: female – female; female thread. Guidance for specification option: Insert requirements. Sizes available: 75 mm; 90 mm; 125 mm; 160 mm. Instrumentation tee with brass thread: female – female; female thread. Guidance for specification option: Insert requirements. Sizes available: 110 mm/ G½"; 110 mm/ G¾"; Temperature probe. Guidance for specification option: Thread size ½" as standard. Insert requirements; sizes available: 70 mm long/ 7 mm diameter; 80 mm long/ 7 mm diameter; 110 mm long/ 7 mm diameter; 120 mm long/ 7 mm diameter; 270 mm long/ 7 mm diameter; 70 mm long/ 4 mm diameter; 80 mm long/ 4 mm diameter; 110 mm long/ 4 mm diameter; 120 mm long/ 4 mm diameter; 250 mm long/ 4 mm diameter. Temperature sensor (for thermocouplers). Ball valve - flanged socket. Guidance for specification option: Insert requirements. Sizes available: 75 mm. 90 mm. 110 mm. Ball valve - double union. Guidance for specification option: Consult manufacturer for size options and insert requirements. Show more Manufacturer guidance Consult manufacturer's literature for further details.
Fire classification	To EN 13501-1/ EN 15015, B-s1,d0.

Sustainability data

Contains Red List materials	No
Country of product manufacture	France
Material	Chlorinated polyvinyl chloride (PVC-C)
Manufacturing plant location	Rue Robert Ancel, 76700 Harfleur, France
Recyclability	- Manufacturer guidance Once the system reaches its end of life, it can be recycled via any plastic recycling company. The repurposed material can be reused in other industries in non-pressurised areas. We would not recommend that the recycled content is used in pressurised systems as this would exceed the lifetime of the material.
Expected Life	50 year

Third party certifications

WRAS

WRAS Material Approval - Fittings

WRAS

WRAS Material Approval - Pipe

Literature

HTA Case Study - Student Accommodation 2

Durapipe Hot and Cold HTA System - Specification Guide

Durapipe Hot and Cold HTA System - Technical Guide

Durapipe Hot and Cold HTA System - Solvent Weld Fittings

Application

Description

General information

Color

Finish

Material

Shape

Length

Width

Height

Warranty description

Uniclass

CAWS

Product range

Specification data - Chlorinated polyvinyl chloride (PVC-C) pipelines

Standards

Pipe

To NF EN 15877.

Fittings

To NF EN 15877.

Third-party certification

WRAS-approved.

Pressure rating

PN25.

Colour

Brown.

Jointing

Nominal sizes

Manufacturer guidance

Bends

Manufacturer guidance

Adaptors

Adaptors and reducers

Manufacturer guidance

Pipe couplings

Manufacturer guidance

Fittings

Pipe collar

Accessories

Manufacturer guidance

Fire classification

Sustainability data

Contains Red List materials

Country of product manufacture

Material

Manufacturing plant location

Recyclability

Manufacturer guidance

Expected Life

Third party certifications

Literature