DPR Sand Fine, Sand Coarse And Sand Smooth

Pre-mixed, vapour-permeable ready to apply acrylic/ silicone-based decorative coating for external and internal walls. Finished appearance is based upon grain size. Pack size: 29.5 kg bucket. DPR (Dirt Pick-up Resistance) technology. The surface of the coating hardens and does not soften again under heat. The non-tacky surface provides high resistance to the accumulation of dirt, mould and pollutants.

Features:

• Excellent hiding power and flexibility characteristics.

• DPR finishes are water-vapour permeable. They do not create a vapour retarder.

• Product also known as Revlane+ Taloche Fin (Sand Fine) and Revlane+ Taloche Gros (Sand Coarse).

Suitable for:

• In-situ and pre-formed concrete. If required level the surface first with Parex base coat Maite.

• Base coats in accordance with BS 13914-1.

• Parex coloured one-coat renders, e.g. Monorex GF.

• ParexDirect or ParexTherm range of Thermal Insulation Systems.

• Advanced Masonry simulation.

• Parexlanko grey one-coat renders e.g. Parmurex/ Parex waterproofing undercoat systems.

• Existing flat substrates.

• Internal walls, drylining plaster (gypsum) substrates. Prepare and apply 310 Primer.

• Painted substrates: The existing paint must demonstrate adequate adhesion or be removed. Prime the surface with 310 Primer.

• Parex profiles.

Unsuitable for:

Lime based substrates.

Finishes:

• Sand Fine and Sand Coarse can create a range of textures and finishes in addition to horizontal dragged or vertical dragged appearances.

• Sand Smooth is best applied using a spraying technique to achieve a uniform smoothness.

• The range of differing finishes is commonly used with the Advanced Masonry Simulation system.

• For additional information on the range of finishes consult the Parex literature referenced DPR Textured Finishes.

Standards:

• BS EN 13914-1 Code of practice for external rendering.

• BS 8000 Workmanship on building sites.

• BS EN ISO 14001:2004.