Direct Drive Roller Shutter - Electric Roller Shutters

Guidance for specification option:

Consult manufacturer for details.

Guidance for specification option:

Consult manufacturer for details.

Guidance for specification option:

Consult manufacturer for details.

Guidance for specification option:

Consult manufacturer for details.

Guidance for specification option:

Consult manufacturer for details.

Guidance for specification option:

• The shutter curtain is constructed from cold-rolled galvanized steel laths (76 mm), of suitable gauge to suit the application.
• Each lath is retained by nylon, pressed steel or malleable iron end locks secured by steel rivets.
• Cast iron wind locks are fitted to help prevent curtain being forced out of guides during high winds, as and when required.

Guidance for specification option:

Standard.

Guidance for specification option:

Note that additional cost applies, consult manufacturer for details.

Guidance for specification option:

Standard.

• Side guides, supporting angles and door curtain are galvanized.
• Non-galvanized sections are primer painted.

Guidance for specification option:

Insert colour requirements, RAL or BS.

Note that additional cost applies, consult manufacturer for details.

Guidance for specification option:

Bottom rail:

• A rigid, inverted, T-section bottom rail, formed from either a cold-rolled galvanized section, or mild steel angles, bolted back to back, depending on the width of the shutter.
• Specially designed tapered bottom rails can be supplied to suit sloping floors at additional cost.

Side guides and angles:

• A purpose cold-rolled mild steel section of depths ranging from 65 to 100 mm dependent upon the application.
• Wind lock guide section to be used as and when required.
• Galvanized steel angles of suitable size and thickness are supplied to support the side guides and to form a secure fixing to the structure.

Roller barrel:

• Constructed from mild steel tube of suitable outside diameter and wall thickness to suit shutter application.
• Barrels are fitted in conjunction with an appropriate safety device, i.e. Safedrive motor unit.

Endplates:

• Of suitable design, and ranging from 3 to 10 mm thickness. Fitted with suitable cleats for fixing to the structure.

Guidance for specification option:

Standard.

• Side guides, supporting angles and door curtain are galvanized.
• Non-galvanized sections are primer painted.

Guidance for specification option:

Note that additional cost applies, consult manufacturer for details.

Guidance for specification option:

Powder-coating finish only.

Insert colour requirements, RAL or BS.

Guidance for specification option:

Insert requirements to suit structure.

Guidance for specification option:

Consult manufacturer for options and insert requirements, or omit.

Guidance for specification option:

Standard.

Guidance for specification option:

Can be used in certain applications but are normally more expensive; consult manufacturer for details.

Guidance for specification option:

Consult manufacturer for options and insert requirements:

• Pull rope;
• Remote control;
• Magnetic loops;
• Photocells;
• Radar.

A push button station is provided as standard with ”UP”, ”DOWN” and ”STOP” buttons.

Guidance for specification option:

Can be supplied at additional cost and are supplied galvanized unless specified otherwise.

Guidance for specification option:

Can be supplied at additional cost and are supplied galvanized unless specified otherwise.

Guidance for specification option:

Can be supplied at additional cost and are supplied galvanized unless specified otherwise.

Guidance for specification option:

Available for shutters up to 5 m wide.