DeltaWing Fencing

Description

DeltaWing is a robust steel louvred fencing system, offering durability and an aesthetic design. It is manufactured with a range of options, offering a choice of total or partial visual screening with a corresponding level of free area.

DeltaWing fences are manufactured from inclined steel flat bars, which are pressure locked to recessed vertical flat bars.

The inclined louvres can be spaced at any increment of 11 mm to provide the required level of visual screening.

  • Louvre flat bars 40 x 2 mm set at 45 degrees; centred at 22, 33, 44, or 66 mm.
  • Vertical flat bars 20 x 2 mm, centred at 132 mm.

Single leaf, double leaf, pivot, cantilevered or sliding gates are made to match with DeltaWing infill. Optional entry/ exit controls can be supplied for restricted access with automatic activation in the event of fire alarm.

Louvre fences are supplied in accordance with BS 1722-14.

Panels and posts can be supplied galvanized only or galvanized and powder coated to any RAL colour.

General information

Finish

Hot dip galvanized

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.

Material

Pressure-locked carbon steel S235JR

Uniclass 2015

Ss_25_14_63_11 Carbon steel continuous bar fencing systemsPrimary

CAWS

Q40/125 Open mesh steel panel general purpose fencing

Q40/126 Open mesh steel panel security fencing

Q40/27 Open mesh steel panel fencing

Q40/30 Proprietary fencing

Q40/430 Proprietary fencing

Specification data - Carbon steel continuous bar fencing systems

Product Reference

DeltaWing fencing

Panel

-

Panel Type

DeltaWing–45

45% visual screening.

DeltaWing–70

70% visual screening.

DeltaWing–90

90% visual screening.

DeltaWing–100

100% visual screening.

Height

1006 mm

1270 mm

1534 mm

1720 mm

2028 mm

2160 mm

2424 mm

2688 mm

2952 mm

Width

Bespoke, 1955 mm maximum.

Posts

-

Straight section

60 x 40 mm RHS

For panel height 1006, 1270, 1534 or 1720 mm.

80 x 40 mm RHS

For panel height 2028, 2160 or 2424 mm.

100 x 50 mm RHS

For panel height 2688 or 2952 mm.

Corners

60 x 60 mm SHS

For panel height 1006, 1270, 1534 or 1720 mm.

80 x 80 mm SHS

For panel height 2028, 2160 or 2424 mm.

100 x 100 mm SHS

For panel height 2688 or 2952 mm.

Fixing

For anchoring within wall pockets

For ground fixing

Off-set over top of wall

With base plates for fixing to a concrete foundation

Finish

Hot dip galvanized

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS 1722–16.

Standard product features

Material:

Pressure-locked carbon steel S235JR.

Fixing:

Panels are framed on two sides with flat bars. This flat bar projects behind the louvre to provide a fixing zone for a bolted panel-to-post connection.

Orientation:

Fences are designed with the louvre flat bars inclined downwards on the outside of the enclosed area.

Installation:

  • Fastenings: Panels fixed to posts with stainless steel bolts with domed heads and snap-off security nuts, all stainless steel grade A2.
  • Groundwork: Refer to BS 1722 giving consideration to existing ground conditions. Posts to be set in holes 300 to 400 mm square in plan and between 550 and 700 mm in depth, depending on fence height. Holes should be completely filled to a minimum of 50 mm below ground level with concrete mix (minimum strength of C20).
  • Height from ground: Panels to sit 100 mm (maximum) off ground.
  • Changes in level: Fence panels stepped to 150 mm (maximum) on standard length post. Post centres to be reduced for steeper gradients (between 1:20 and 1:7).
  • Changes in direction: 60 x 60, 80 x 80 or 100x100 mm SHS or RSA for 90 degrees corner post. Composite flat bar posts for other angles.

Product Options

Panel:

- Height:

Fence heights of 2028 mm and above are supplied as two panels which stack together. Non-standard heights fabricated upon request.

Posts:

Alternative lengths and style of post:

  • For anchoring within wall pockets.
  • For ground fixing.
  • Off-set over top of wall.
  • With base plates for fixing to a concrete foundation.

- Corners:

Composite manufactured from two flat bars – corners which are not 90 degrees.

Finishing:

Polyester powder coating is a multi-stage process which applies thermo-setting resins producing a superior finish to painting.

Literature

Similar products from Lang+Fulton