NBS Source
List your products
Application

  • Used in the re-coating and refurbishment of aged and weathered glass reinforced plastic (GRP) rooflights, often in conjunction with Seamsil and Delcote systems.
  • Fully cured Delglaze provides a tough clear elastic coating with crack bridging capabilities that can be used on a wide range of common building components such as concrete, glass, GRP and ceramic tiling.

Description

Delglaze is a high performance, high build, single component moisture curing aliphatic polyurethane coating.

Installed by Sharmans network of approved contractors, all project works are inspected and certified to exacting quality standards - consult manufacturer for details.

The system includes:

  • Delglaze first coat: Utilising roller or brush, apply a first coat of Delglaze to the prepared, clean and dry, structurally sound surfaces at a wet film thickness of 166 microns and allow to fully cure.
  • Delglaze second coat: The first coat must cure for a minimum of six hours or until in a tack free state before the second coat is applied. Apply a second coat at right angles to the first coat at a wet film thickness of 166 microns and allow to fully cure.

Features and benefits:

  • Primerless adhesion to most common building products.
  • Resistant to weathering conditions; UV radiation, rain, snow and temperature extremes.
  • Fully compatible with Seamsil and Delcote protective coatings.
  • Fast application without disruption to internal activities.
  • Easy to apply by mini roller or brush.

Applications:

  • Used in the re-coating and refurbishment of aged and weathered glass reinforced plastic (GRP) rooflights, often in conjunction with Seamsil and Delcote systems.
  • Fully cured Delglaze provides a tough clear elastic coating with crack bridging capabilities that can be used on a wide range of common building components such as concrete, glass, GRP and ceramic tiling.

General information
Specification data
Product Reference

Delglaze® for coating rooflights

Standard product features

Technical characteristics:

  • Product type: Single component blend of polyurethane resins.
  • Curing system: Aliphatic polyurethane.
  • Appearance: Transparent semi-gloss.
  • Drying time at 20°C: Touch dry in 4 hours. Hard dry in 12 hours.
  • Overcoat time at 20°C: 6 hours (minimum).
  • Solids: By weight 80%, by volume 60%.
  • Theoretical coverage: 4 m² per kilogram per coat.
  • Tensile strength: 1.6 N/mm².
  • Application temperature: 3–60°C.
  • Dew point: Surface to be 2°C above the dew point.
  • Dry film thickness: 200 microns (minimum).