Decothane Base Coat
BBA Agrément Certificate
Certificate type
QA Certificate
Certificate type
A high performance polyurethane coating used as an embedment coat for the Decothane waterproofing systems.
Features:
- Totally seamless, single pack liquid applied membrane.
- Cold applied – eliminating the risk of fire during installation.
- High solids, VOC compliant to 2004/42/CE.
- BBA certified system.
- Highest fire ratings once installed (BROOF(t4)).
- Fast curing, develops early rain resistance.
- Excellent adhesion to most conventional substrates.
- Easy and quick application – Deco Applicator available.
- Minimal disruption and low maintenance.
- Elastic properties – tolerant of thermal movement.
- Vapour permeable.
- Flexible, impact resistant membrane.
- Can be applied all year round above 2°C.
- Approved to ETAg 005 (Part 6).
- Single point guarantee available if installed by a Liquid Plastics Quality Assured Contractor.
Areas of use:
- Embedment coat for liquid plastics waterproofing systems including Omega 15, Gamma 20 and Delta 25.
- For insulated and non-insulated roof designs.
- For new construction and refurbishment projects.
| Features | Totally seamless, single pack liquid applied membrane Cold applied – eliminating the risk of fire during installation High solids, VOC compliant to 2004/42/CE BBA certified system Highest fire ratings once installed (BROOF(t4)) Fast curing, develops early rain resistance Excellent adhesion to most conventional substrates Easy and quick application – Deco Applicator available Minimal disruption and low maintenance Elastic properties – tolerant of thermal movement Vapour permeable Flexible, impact resistant membrane Can be applied all year round above 2°C Approved to ETAg 005 (Part 6) Single point guarantee available if installed by a Liquid Plastics Quality Assured Contractor |
| Uniclass 2015 | |
| CAWS | J31/120 Warm deck roof coating J31/30 Laying vapour control layer J31/5 Cold deck roof coating J31/110 Cold deck roof coating |
| Product Reference | Decothane Base Coat |
| Primer | Dependent on substrate requirements, contact manufacturer for further information. |
| Coating application | - |
| 1st coat | Minimum 1 litre/m²Roller applied on flat surfaces – brush applied for detail work. |
| 2nd coat | 0.75 litre/ m² - roller applied on flat surfaces – brush applied for detail workFor Omega 15 system. 1 litre/ m² - roller applied on flat surfaces – brush applied for detail workFor Gamma 20 system. 0.75 litre/ m² - roller applied on flat surfaces – brush applied for detail workFor Omega 15 system. |
| 3rd coat | Not required1 litre/ m² - roller applied on flat surfaces – brush applied for detail workFor Delta 25 system only. |
| Reinforcement | Reemat Premium GFM embedded in base coat |
| Minimum dry film thickness – full system | 1500 micrometresFor Omega 15 system. 1700 micrometresFor Gamma 20 system. 2300 micrometresFor Delta 25 system. |
| Standard product features | Drying time: 4–6 hours (20°C), 6–8 hours (10°C), 12–16 hours (2°C). Fire Resistance:
|
| Product Options | Colour: Red. Primer: Consult Liquid Plastics for use of primer appropriate to substrate. |
- 92/2803
- European Technical Approval: No. ETA - 03/0052
- External fire performance: BROOF(t4) & classification under BS 476-3: 1958 EXT.F.AA