A two pack, solvent free, very durable anti-microbial surface coating.
A two pack, very durable solvent free polyurethane surface coating, suitable for interior and exterior use. The system has anti-microbial properties (including resistance to MRSA) and can be decontaminated from radioactivity.
Controls the growth and spread of microbes by incorporating non-leaching anti-microbial additives in all system layers
Easily cleaned and resistant to strong cleaning agents and low concentrations of aggressive chemicals
Can be radiation decontaminated (complies with Health Building Note 26 'Facilities for Surgical Procedures: Volume 1')
Will allow minimal water to permeate through the film
Colour and UV stable and has a low VOC
System incorporating hygienic mastic should be used in areas where positive/negative pressure or temperature cycling occurs and when system is applied in wet areas (e.g. bathrooms/shower areas)
M60/18 Special coating
M60/195 Special coating
CS Wallglaze® Wallflex®
One coat of CS Wallglaze® Plastic Primer, at 12– 15 m²/ litre
One coat of CS Wallglaze® Multi Surface Primer, at 6-14 m²/ litre
For ceramic tiles, melamine surfaces, brickwork/blockwork, vibro-concrete and wet areas.
One coat of CS Wallglaze® White Primer, at 7-9 m²/ litre
For plaster, plasterboard, cementitious screeds and non-vibrated concrete.
One coat of CS Wallflex® Universal Undercoat, at 9-11 m²/ litre
Required only for application over White Primer.
Two coats of CS Wallflex® Topcoat Eggshell, at 8-10 m²/ litre
BS 4800, ___
As schedule ___
Standard product features
Once applied and cured, CS Wallflex is stable in temperatures between -15°C and +80°C.
A range of colour options are available, including BS 4800, RAL or NCS 2nd Series type colours. Colour matching to a specific sample can also be achieved.