Crown Trade Timonox Anti-Graffiti Flame Retardant Glaze
Verified by manufacturer 5 months ago
Anti-graffiti flame retardant glaze.
Application
For internal use only.
Description
A clear two pack, 100% solids, Anti Graffiti Flame Retardant Glaze forms part of fire-tested systems for use over Timonox Vinyl Matt only, providing an effective non-sacrificial anti-graffiti finish.
For Fire Tested systems refer to Technical Data Sheet for Timonox Anti Graffiti Flame Retardant Glaze.
General information
Finish | Satin |
Material | Epoxy resin |
Shape | Formless |
Uniclass | |
CAWS | M60/175 Protective coating M60/18 Special coating |
Product range |
Specification data - Flame-retardant coatings
Product Reference | Timonox Anti-Graffiti Flame Retardant Glaze |
Finish | Satin. |
Pigment | Flame retardant additives. |
Binder | Epoxy silane. |
Solvent | None. |
Drying time | Under normal drying conditions surface dry in 2 hours. Allow for adequate ventilation during the drying period. |
Pot life | Four hours at 20°C. |
Coverage | 15 m²/ litre. |
Wet film thickness (minimum) | 67 micrometres at 15 m²/ litre, corresponding to figures quoted on the Fire Test Report and showing the minimum film build required. |
Dry film thickness (minimum) | 67 micrometres at 15 m²/ litre, corresponding to figures quoted on the Fire Test Report and showing the minimum film build required. |
VOC content | EU limit value for this product (cat.A/j): 500 g/L (2010). This product contains maximum 0 g/L VOC. |
Sustainability data
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Recyclability | 100% |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 0 % |