NBS Source
I'm a manufacturer
Compare variants

Concrex Range - Two part epoxy resin repair mortar

Verified by manufacturer 4 months ago

Concrex Colours - Epoxy Repair Mortar

Watco UK Ltd Variant:

A range of epoxy resin repair mortars.

Jump to:
+44 (0)1483 418418 Website

Application

Surface preparation

Surfaces to be treated must be clean, dry and free of all loose material. Wire brushing or sweeping is usually sufficient. Watco Bio-D degreaser can be used if there are spots of oil or grease. If the surface is damp it can be primed with Watco Tack Coat.

The resin content of Watco Concrex® Carbon Fibre is very high. This means that a primer is not usually required when filling holes in concrete floors or resurfacing rough or damaged concrete. Watco Tack Coat adhesive primer is recommended when using Concrex® Carbon Fibre as a thin section screed over smooth surfaces. It is also recommended when repairing intricate/high impact areas such as broken floor joint edges, and damaged step nosings.


Mixing

Each bucket contains Concrex powder and bottles of curing agent. Mix the two components with a trowel until you achieve a uniform grey colour, you can complete the mixing by using your gloved hands. For large quantities, it is advisable to use a mixer.


Application

  • Apply the repair mortar to the surface to be repaired and smooth with a trowel. To prevent streaks, wipe the blade with a rag soaked in white spirit.

Description

New Watco Concrex® Carbon Fibre is the ultimate floor repair mortar. The addition of carbon fibre makes this the strongest, longest lasting floor repair mortar that you can buy.


The unique formulation also includes a rapid setting curing agent for even faster repairs, and Novolac resin for superior chemical resistance - cement based repair mortars have no resistance to acidity. Abrasion resistance is greatly enhanced by the addition of a ceramic additive. Compared with other repair mortars this formulation is particularly rich in epoxy resin. This provides superior strength and adhesion, making it ideal for very thin section, feather-edge or intricate repairs.


The new rapid cure formulation keeps downtime to a minimum in busy areas, with light traffic possible in as little as an hour. Use in heavy wear areas where other repair mortars would fail - make your floor repairs permanent with Watco Concrex® Carbon Fibre.


Features and benefits:

  • Epoxy resin reinforced with carbon fibre and ceramic.
  • Virtually indestructible.
  • Rapid curing – ready for light traffic in as little as an hour.
  • Excellent chemical resistance.
  • Resin rich for thin section and feather-edge repairs.
  • Anti slip.
  • Non-dusting.
  • Incredibly versatile.


Recommended areas of use

  • Holes
  • Spalled expansion joints
  • Worn floors
  • Damaged steps
  • Fitting guide rails
  • Reforming a slope


General information

Color

Grey

Blue

Green

Red

Finish

Textured

Anti-slip

Material

Epoxy resin

Uniclass

Pr_20_31_53_26 Epoxy mortarsPrimary
Pr_35_31_65_80 Stopper fillers
Pr_35_31_65_82 Surface fillers
Pr_20_31_16_80 Small-area repair concretes
Pr_20_31_53_15 Concrete repair mortars

CAWS

C42/315 Protective coating to reinforcement

C42/310 Repair mortar

Product range

Repair / Asphalt Repair
Repair / Concrete Repair

Specification data - Epoxy mortars

Execution

Testing compressive strength of mortar.

Product Reference

Concrex Colours - Epoxy Repair Mortar

Colour

Grey.

Green.

Tile red.

Stone.

Buff.

Show more

TensileStrength

15.4 MN/m².

Flexural strength

55.9 MN/m².

CompressiveStrength

55.2 MN/m².

Finish:

Smooth.

Literature

Data Sheet: Concrex Range

Data Sheet: Concrex Range

Similar products from Watco UK Ltd

Concrex Carbon Fibre

Concrex Carbon Fibre

Flowpatch Range - Pourable repair mortar

Flowpatch Range - Pourable repair mortar