CASEA RADDIPLUS T – Thermal Anhydrite Floor Screed Binder
RADDIPLUS T Screed is suitable for floors in homes, offices, public buildings and places exposed to similar loads. RADDIPLUS T Screed may be applied as a levelling screed directly onto a load bearing floor, unbonded on a separating barrier (polythene), as a floating floor and is particularly suited in conjunction with underfloor heating or cavity floors.
RADDIPLUS T Screed should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet. If a cement based adhesive or smoothing compound is required the surface of the screed must first be sealed, using an appropriate acrylic primer/ sealer. Contact SMET for advice on which to use.
A specially formulated thermal calcium sulphate binder suitable for producing top-quality self levelling (flowing) floor screeds, simply by blending with a suitable sand and water on site or ready-mix plant. RADDIPLUS T complies with EN 13454-1 and is CE marked.
Features and benefits:
M13/10 Proprietary trowelled levelling screeds
M13/120 Proprietary self smoothing levelling screeds
Minimum: Bonded, 20 mm. Unbonded, 30 mm. Domestic, 35 mm. Commercial, 40 mm. Over underfloor heating pipes: 25 mm (BS 8204-7); Maximum: 90 mm.
30–45 minutes, depending on ambient conditions.
Light foot traffic
24 hours depending on site conditions (approximately).
Four days depending on site conditions (approximately).
Reaction to fire
1.2 kg/dm³ (approximately).