Verified by manufacturer 2 days ago
A high performance EPS external wall insulation solution.
EWI systems.
An external wall insulation system featuring a ready-to-use, structural silicone resin finishing coat to DIN EN 15824.
Features and benefits:
The system consists of the following:
Color | White |
Finish | Matt |
Material | Silicone |
Shape | Formless |
Uniclass | |
CAWS | M21/210 Rendered external wall insulation systems M21/20 External wall insulation systems |
Classification data | |
Preparation | Sub and top primer: Putzgrund 610. Guidance for specification option: A white special primer with good adhesion and coverage as adhesion-promoting primer for subsequent synthetic resin, silicone resin, silicate and mineral renders as well as coloured stone render coatings in the Capatect facade system. |
Insulation | |
Material | Graphite Enhanced EPS. Guidance for specification option: A high quality expanded polystyrene (EPS) board enhanced with integrated graphite. |
Adhesive | Mortar 186M. Guidance for specification option: A light grey mineral ready-mixed dry mortar for use as adhesive and base coat for insulation boards, optimized for machine application. |
Render carrier or reinforcement | |
Material | Gewebe 650. Guidance for specification option: An orange coloured specially equipped, slippage-resistant glass fibre mesh in the Capatect façade systems. Size: 50 x 1.1 m. |
Mesh size | Mesh size approximately 4 x 4 mm. |
Render | |
Application | Base coat and finish coat. |
Material | Base Coat: Mortar 186M. Finish: Capatect AmphiSilan - Fassadenputz K15. Guidance for specification option: Base Coat: Mortar 186M A light grey mineral ready-mixed dry mortar for use as adhesive and base coat for insulation boards, optimized for machine application. Finish: Capatect AmphiSilan - Fassadenputz K15: A matt, ready-to-use, structural silicone resin finishing coat to DIN EN 15824. Colour: White. Can be tinted by manufacturer. Suitable for machine tinting with dosing systems from ColorExpress. Further custom colors with lightness value >20 on request. If, for design reasons, colors with lightness value <20 are required, these can be achieved in some cases with a double coat of Muresko CoolProtect paint. Small quantities can be tinted with CaparolColor or AmphibolinColor colourants with maximum 2 % to avoid low consistency. |
Decorative finish | K15, scratched texture 1.5 mm. Manufacturer guidanceFinish: Capatect AmphiSilan - Fassadenputz K15. |
Colour | White. |
Country of material origin | Germany |
Country of product manufacture | Germany |
Manufacturing plant location | |
Material | Silicone |
Recyclability | recyclable packaging |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 70 % |