Brick Effect Render
Application

For exterior application for render and external wall insulation (EWI) systems, for brick effect refer to manufacturer's guidance.

Description

Water repellent render, designed to ensure a long lasting, tough and weather resistant finish. Creating the brick effect is possible by applying this product in two coats (a mortar and a face coat) and cutting through the top coat to expose the mortar coat beneath. For application via trowel.


Do not apply if frost is forecast within 24 hours, in wet conditions or when humidity is above 85%, in temperatures below 5˚C or above 30˚C. Sheeting the facade or the scaffold is advised to protect the render for the first 24 hours after application.


Consult manufacturer's literature for surface preparation and mixing information.

General information

Finish

Textured

Material

Cement based

Uniclass 2015

Pr_35_31_64_12 Cementitious rendersPrimary
Specification data - Cementitious renders Enhanced data

Product Reference

Brick Effect Render

Coverage

Approximately 12 kg/m².

Initial set

24 hours.

Temperature conditions for use

Do not apply if frost is forecast within 24 hours, in wet conditions or when humidity is above 85%, in temperatures below 5˚C or above 30˚C.

Digital objects
PlatformCompatibleVersionCertified to
IFC
- 1 2.1
Revit
Revit 2017 1 2.1
Download now from NBS National BIM Library
Similar products from Johnstone's Trade Paints - a brand of PPG Industries