Electrically operated bi-folding gates suitable for car park entrances, especially where room is limited.
Electrically operated bi-folding gates suitable for car park entrances, especially where room is limited.
Features and benefits:
Uniclass 2015 | |
CAWS | Pr_30_59_34_14 null Q41/190 Vehicle access point barriers |
Product Reference | Bi-Fold Gates |
Standard | Consult manufacturer |
Dimensions | - |
Span | Insert requirements, up to 6 m. |
Height | Insert requirements, up to 4 m. |
Arrangement | Manufacturer's standardPair of leaves each side folding at 90° to the opening. BespokeConsult manufacturer and insert requirements. |
Posts | Not applicable |
Gate leaves | 60 x 40 mm RHS perimeter frame with 25 mm diameter tubes at 125 mm centres60 x 40 mm RHS perimeter frame with 25 mm SHS uprights at 125 mm centresBespokeConsult manufacturer and insert requirements. |
Hardware | - |
Hinges | Manufacturer's standard |
Tracks | Manufacturer's standard |
Securing | See Operating options |
Operating | Manufacturer's standard |
Handles | Manufacturer's standard |
Additional operating controls | Not requiredLoop detectorsPhotocellsProximity readersRadio controlRemote controlTimer close |
Finish as delivered | - |
Worked finish | Not applicable |
Applied finish | GalvanizedStandard. Polyester powder coated, RALConsult manufacturer for options and insert requirements. |
Accessories | NoneWicket gates in main gateWicket gates within in a matching fixed section |
Standard product features | Weight: Typically 35 kg/m². May vary with gate leaf design; consult manufacturer for details. |
Product Options | Dimensions: - Span: Larger openings can be accommodated by matching over/ side panels or multifold gates. - Height: Larger openings can be accommodated by matching over/ side panels or multifold gates. Gate leaves: Higher gates have a mid-rail for strengthening purposes; consult manufacture for details. Hardware: - Tracks: The compact top guide track keeps headroom to a minimum and the door is supported on floor bearings at each side obviating the need for a bottom track, thus allowing a continuous floor surface. - Handles: Handles are attached to each leading edge to allow manual operation in the event of power failure. Operating: - Manufacturer's standard: The gates are electrically operated by two single phase motors mounted at the top of each gate with a common control panel and open/ close/ stop push buttons mounted adjacent to the opening. Disconnection for emergency manual operation is provided in the event of power failure. |
© 2020 NBS Enterprises Ltd. All rights reserved.
1 / 1