NBS Source
I'm a manufacturer
Compare variants

Application

  • Pedestrian safety.
  • Prevention of damage to roadside equipment and street furniture.
  • Protection of buildings and structures, particularly corners and overhangs.
  • Localized protection of roadside kerbline.
  • Vehicular width restriction.
  • Preservation of soft verge.

Description

A solution to potential vehicle damage and costly repair caused by errand vehicles.

Following an extensive study of lorry wheels and undercarriages, a design was created to enable the deflection of vehicle wheels, whilst itself remaining firmly in place and undamaged. The bollard profile is designed to encourage vehicle tyres to initially mount its lower curve. By increasing the slope-angle of the bollard above this point, any attempt by the vehicle to rise further is prevented by deflecting the tyre sharply away.

Bell bollards can provide a stable vehicular barrier, as high-axled lorries would not be able to drive over an obstruction of this height, without causing irreparable damage to its drive train and steering mechanisms. Positioned and aligned at appropriate distances across the road, Bell Bollards can also act as effective width restrictors, preventing oversize vehicles from passing through.


Features and benefits:

  • Proven to last for over 25 years.
  • Saves money through long term savings on replacement street furniture and building repairs.
  • Up to 360° deflection of vehicles with minimal risk of vehicle damage.
  • Furnitubes are the only manufacturers of the Bell bollard in the UK.
  • Four versions of the Bell to solve any traffic management problem.


Variations:

  • The BELL 100 the original, full Bell Bollard. Ideal for: Open sites where there are no below-ground obstructions
  • BELL 150 has been designed to allow the installation of a Bell bollard and a 150 mm diameter post or bollard within the same footings. The combination will deflect vehicles and protect structures from damage, whilst also acting as a high visibility post.
  • BELL 120 is suitable for protecting the sides of structures. The shape is the same as a standard Bell, but with a segment removed to allow for easy installation without having to disturb the fabric of existing structures.

General information

Color

Black

Finish

Primed

Material

Cast iron

Shape

Other

Guidance for specification option:

Bell-shaped.

Height

475 mm

Warranty description

One year

Uniclass

Pr_20_76_08_10 Carbon steel bollardsPrimary

CAWS

Q50/190 Bollards

Q50/30 Street furniture

Product range

Bollards

Specification data - Carbon steel bollards

Dimensions

-

Size and profile

600 mm diameter, bell-shaped.

Height

475 mm.

Manufacturer guidance

Consult manufacturer literature for product dimensions and weights.

Length below ground

450 mm.

Manufacturer guidance

Consult manufacturer literature for product dimensions and weights.

Post top

Bell-shaped rounded top.

Post base

Flat.

Finishes

-

Applied finish

Primed.

Guidance for specification option:

Top coats are preferably applied on site after installation on primed products.

Colour

Black.

Fixing

Root fixing.

Diameter

100 mm.

Type:

Original Bell bollard.

Material:

Cast iron.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Recyclability

100

Literature

Furnitubes Bell Bollards Brochure

Furnitubes Bell Bollards Brochure

Similar products from Furnitubes International Ltd

Zenith Carbon Steel Bollard

Zenith Carbon Steel Bollard