Verified by manufacturer 3 months ago
BBA Agrément Certificate
Certificate type
CCPi System
Certificate type
EPD
Certificate type
Two-layer, self-adhered, warm roof bitumen membrane waterproofing system suitable for new build and refurbishment applications, incorporating torch-on bitumen capping sheet.
Suitable for a variety of applications on both new build and refurbishment projects and can be used in warm, cold and inverted roof scenarios. For green roof situations, see Bauder Total Green Roof System PLUS (BTGRS PLUS).
Total bitumen warm roof system PLUS, incorporating torch-on bitumen capping sheet with self-adhered bitumen underlayer, insulation and self-adhered bitumen air and vapour control layer (AVCL).
Bauder Total Roof System PLUS (BTRS PLUS) is suitable for a variety of applications on both new build and refurbishment projects and can be used in warm, cold and inverted roof scenarios. For green roof situations, please see Bauder Total Green Roof System PLUS (BTGRS PLUS), which has the option of using a root-resistant capping sheet.
BTRS PLUS system holds fire classification BROOF(t4) for compliance with building regulations under TS 1187 test method 4 for external fire exposure to roofs, stated permutations of build-ups verified by the BBA are listed on our certification. BTRS PLUS is deemed ‘unrestricted’ and suitable for use on any part of a roof.
Plus points:
Verified properties:
Torch-Free/ Safe to Torch Zone Detailing:
Bauder was the first manufacturer to pledge its support to the Safe2Torch initiative, introduced by the National Federation of Roof Contractors (NRFC) in July 2017. The torch-free detailing designs specifically deliver secure and safe installations in the vicinity of combustible construction materials located on, or connected to, the roof such as timber substrates or upstands; abutments to cladding, roof tiles, slates or thatch; or debris such as dry leaf material that is at risk from ignition.
Torch-free detailing can be integrated into all bituminous waterproofing solutions to give versatile, safe installation techniques for all roof types, site conditions and budgets.
The waterproofing flashing should be turned up by at least 150 mm around features such as rooflights, parapets and service pipes passing through the roof, detail work to upstands, edge details, flashings, etc. The membrane should not be taken up in one piece. Consult manufacturer for further information.
Features and benefits of Torch-Free/ Safe to Torch Zone Detailing:
Color | Grey Guidance for specification option: Mineral finish is Charcoal Grey. |
Finish | Mineral |
Material | Bitumen Guidance for specification option: Elastomer modified bitumen membrane. |
Shape | Square Rectangle |
Warranty description | Manufacturer guidanceGuarantee options could include ‘Product’, ‘Product and Workmanship’ and ‘Product, Workmanship and Design’ Guarantees. All guarantees available for this system are subject to the works being carried out in accordance with the Bauder specification and being installed by a Bauder Approved installer. For full details and further information regarding guarantees and alternative systems, contact the local Bauder Representative or technical@bauder.co.uk. |
Material | Bitumen Guidance for specification option: Elastomer modified bitumen membrane. |
Uniclass | |
CAWS | J41/110 Built-up reinforced bitumen membrane warm deck roof covering J41/10 Reinforced bitumen membrane warm deck roof covering |
Preparation | |
Horizontal work | Activator-Primer (Canister) APR01 – Black.Guidance for specification option: Synthetic rubber resin-based primer, developed to provide the necessary preparation of substrates prior to the installation of self-adhesive and torch-applied membranes. The spray application offers improved film thickness speed of application (by up to 50% over roller applied products) and quick drying in a matter of minutes.
SA Bonding Primer.Guidance for specification option: For Self-Adhesive membranes to Concrete. Bauder SA Bonding Primer is a synthetic rubber-based primer applied by a roller or brush. Specially formulated to increase the bond strength of Bauder self-adhesive bitumen membranes to a wide range of substrates, including timber, concrete, brick, metal and most plastics.
Manufacturer guidanceContact manufacturer to confirm substrate suitability if required. |
Skirtings and vertical work | As 'Horizontal work'. |
Air and vapour control layer | |
Type | BauderTEC KSD FBS.Guidance for specification option: Self-adhesive elastomeric bitumen air and vapour control layer (AVCL), with a mica finished upper surface. One side lap features an 80 mm wide glass fleece along the underside, and a 100 mm strip of aluminium foil above. The other side lap has a thermofusible film on the top surface. This arrangement ensures that laps are heat sealed using hot air or gas torch as appropriate to extrude a bitumen bead, thus ensuring waterproofing integrity.
BauderTHERM DS 1 DUO.Guidance for specification option: Self-adhesive elastomeric bitumen air and vapour control layer with patented “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures. The product also features thermally activated bitumen stripes on its top surface to provide the bonding compound for the insulation boards.
|
Attachment | Self-adhered. |
Insulation | |
Type | BauderGLAS Flatboard.Guidance for specification option: Insert required thickness.
Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge. Cellular glass insulation suitable for projects that require a high level of compressive strength and/ or to be non-combustible.
BauderGLAS Tapered.Guidance for specification option: Insert required thickness.
Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge. Cellular glass insulation suitable for projects that require a high level of compressive strength and/ or to be non-combustible.
BauderROCK Flatboard.Guidance for specification option: Insert required thickness.
Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge or mechanically fixed. Mineral fibre insulation suitable for projects that require a high level of sound reduction and/ or to be non-combustible, and has a zero GWP and ODP rating.
BauderROCK Tapered.Guidance for specification option: Insert required thickness.
Can only be used with PU Insulation Adhesive – Tin (with ‘water-overmist’) or PU Insulation Adhesive – Twin cartridge or mechanically fixed. Mineral fibre insulation suitable for projects that require a high level of sound reduction and/ or to be non-combustible, and has a zero GWP and ODP rating.
BauderVIP TE 60 mm Flatboard.Guidance for specification option:
BauderVIP TE 80 mm Flatboard.Guidance for specification option:
PIR FA G16 foil-faced tapered insulation.Guidance for specification option: Insert required thickness.
PIR FA-TE Flatboard.Guidance for specification option: Insert required thickness.
|
Fixing | PU Insulation Adhesive – Tin.Guidance for specification option: Not for foil to foil applications (e.g. FA-TE to FA-TE). Activator-Primer (Canister) APR01 – Black.Guidance for specification option: For foil to foil applications (e.g. FA-TE to FA-TE). Must be used to bond ridge/valleys on FA G16 Tapered Schemes. PU Insulation Adhesive – Twin cartridge.Guidance for specification option: For foil to foil applications (e.g. FA-TE to FA-TE). |
Waterproof covering | |
First layer | |
Type | BauderTEC KSA DUO 35.Guidance for specification option: Elastomer bitumen self-adhesive underlayer with variable technology for lap sealing. The two side laps of the membrane have differing finishes. On one lap there is a self-adhesive finish, whist the opposite lap has a glass fleece. This allows the membrane to be sealed with either a gas torch or hot air welder.
Manufacturer guidanceTo be fully specified separately. |
Attachment | Self-adhered. |
Top layer | |
Type | BauderKARAT.Guidance for specification option: Polymer bitumen dual formulation torch-on capping sheet. APP plastomeric top and SBS elastomeric bottom. The product features a 300g/m² spunbond polyester/glass composite reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.
Manufacturer guidanceNot for use with green roof systems. |
Attachment | Self-adhered. |
Detail work | |
Flashings | Not required.Bauder GRP Trim.Guidance for specification option: GRP roof edge trim for use with Bauder bituminous roof systems. Available colours of either grey or black and a choice of profiles to suit the requirements of most projects. Bauder GRP Water Check Trim.Guidance for specification option: GRP water check trim to be used on parapets and perimeter kerbs wider than 200 mm – must not be used on its own as a check kerb. Available in black only. Bauder Aluminium Termination Bar.Guidance for specification option: Natural finish aluminium alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. Bauder GRP Termination Bar.Guidance for specification option: Black glass reinforced plastic (GRP) alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing. It should be restricted to use on upstands where a chase cannot be cut into the wall. |
Skirtings and upstands | Not required.Bauder LiquiFIBRE Detailing Kit.Guidance for specification option: Fast-curing waterproofing resin, containing fibre reinforcement that can be used for detailing awkward shapes or inaccessible areas where using LiquiDETAIL is impractical. PMMA-based resin that requires a catalyst and is solvent, isocyanate and halogen-free. Bauder LiquiDETAIL.Guidance for specification option: Cold liquid applied fast curing waterproofing resin that can be used on upstands and details. PMMA-based resin that requires the addition of catalyst to trigger curing and is solvent, isocyanate and halogen free. |
Welted drips | Required.Guidance for specification option: Insert requirements. Not required. |
Cover strips | Required.Guidance for specification option: Insert requirements. Not required. |
Ancillary items | Required.Guidance for specification option: Insert requirements. Not required. |
Surface protection | Not required.Required.Guidance for specification option: BauderGREEN FSM 600 protection mat laid on the completed waterproofing to protect the completed waterproofing from mechanical damage. Must be used with decorative ballast finishes. |
System accessories | Not required.Bauder lightning conductors.Guidance for specification option: Lightning conductor clips are a specially designed secure clip that allows for movement.
Bauder rainwater outlets.Guidance for specification option: Bauder has a range of insulated or stainless-steel rainwater outlets. The insulated outlets can be used for maintaining thermal continuity at drainage points. Suitable for warm, cold and inverted roof construction, the high thermal value of the rigid foam body prevents condensation from forming on the underside of the outlet. Designed for use when connecting to conventional drainage systems, with excellent flow rate performance and is suitable for both new build and refurbishment projects. Outlets are included in the Bauder waterproofing system guarantee as they are integrated components. Flow rate figures (where applicable) are based on BS EN 12056:3:2000, typically taken using a 35mm header of water including leaf grille:
BauderSOLAR F XL Photovoltaic Mounting System.Guidance for specification option: Bauder Flat roof PV mounting solution for framed solar modules. The mounting units are secured to the roof using a membrane-to-membrane welding technique. This installation method means that the roof is not compromised by penetrations for fixings nor is it ballasted, which would add additional weight loading to the roof. Specifically designed to be installed on Bauder bituminous or single ply waterproofing systems and provide a lightweight, low risk and quick to install mounting solution for framed solar modules. Bauder rooflights/ glazing/ ventilation.Guidance for specification option: All these glazing products are fully compatible with the roof waterproofing systems. Consult manufacturer for details and insert requirements.
|
Surfacing layer | Not required. Bauder Supported Paving. Guidance for specification option: A range of pedestal support systems designed to meet the exacting standards of finishing levels demanded when specifying open-jointed paving and decking finishes for hard landscaped intensive rooftops.
Bauder Supported Decking. Guidance for specification option: A range of pedestal support systems designed to meet the exacting standards of finishing levels demanded when specifying open-jointed paving and decking finishes for hard landscaped intensive rooftops.
Ballast (by others). Guidance for specification option: 20–40 mm rounded washed pebbles. |
Material | Bitumen Guidance for specification option: Elastomer modified bitumen membrane. |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
![]() | - | 1 |
![]() | - | 1 |
BBA Agrément Certificate
Certificate: Bauder Total Roof Systems PLUS 10/4744
CCPi System
Bauder BTRS-BTGRS Plus CCPI
EPD
Environmental Product Declaration - RBM
BBA Agrément Certificate
BauderROCK BBA
BBA Agrément Certificate
Certificate: Bauder PIR Insulation
BBA Agrément Certificate
Certificate: Bauder Total Roof Systems 10/4744
EPD
Environmental Product Declaration - FOAMGLAS - EPD-PCE-20200300-IBB1-EN
EPD
Environmental Product Declaration - Rockwool
EPD
Environmental Product Declaration - PU thermal insulation boards with 50 m aluminium facing
Bauder Activator-Primer (Canister) APR01 - black
Bauder SA Bonding Primer - Technical Data Sheet
BauderTEC KSD FBS Roofing membrane
BauderTHERM DS 1 DUO Roofing membrane
BauderROCK Tapered Insulation
BauderROCK Flatboard Insulation
BauderPIR FA-TE Flatboard Insulation
BauderPIR FA G16 Tapered Insulation
BauderTEC KSA DUO Roofing membrane
BauderKARAT Roofing membrane
Bauder LiquiFIBRE
Bauder LiquiDETAIL
Bauder Bitumen Compact Vertical Outlet DN 100
Bauder Bitumen Vertical Outlet DN70 & 150
Bauder GRP Trim & GRP Watercheck Trim
BauderPIR GFS G16 Tapered Ridge Infills
BauderPIR KFS G16 Tapered Valley Infills
Bauder PU Insulation Adhesive - Tin
BauderSOLAR F XL - Technical Data Sheet
Bauder SVP Cover - Technical Data Sheet
BauderTEC KSA DUO 35 Roofing membrane
Bauder waterproofing systems are now CCPI verified.
Flat Roof Design Considerations - Bauder
Insulation - Bauder
New Build Flat Roof Solutions - Bauder brochure
Refurbishment Flat Roof Solutions - Bauder brochure
Reinforced Bitumen Membrane Systems - Bauder brochure
Rooflights, Outlets & Products - Bauder
Torch-Free Detailing System - Bauder
Bauder System Airtech Warm Roof System - Self Adhered
Bauder Total Green Roof System PLUS Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)
Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System - Torch Applied.
Bauder Total Green Roof System Reinforced Bitumen Membrane Warm Roof Covering System Self-Adhered (with Torch-On Capping Sheet)
Bauder Total Warm Roof System - Self Adhered
Bauder Total Warm Roof System - Torch Applied
Bauderflex Green Warm Roof System - Self Adhered (with Torch-On Capping Sheet)
Bauderflex Warm Roof System - Self Adhered
Bauderflex Warm Roof System - Torch Applied