You are viewing content for United Kingdom.

Choose a country to see content for your location. Changing region will navigate you to the homepage.

NBS Source
I'm a manufacturer

Bauder GRP Termination Bar - Termination Bar

Verified by manufacturer 22 hours ago

Bauder Ltd

GRP termination bar used for terminating waterproofing membranes at wall abutments where specified.

Jump to:
Request BIM
+44 (0)1473 257671 Website

Application

For use terminating waterproofing membranes at wall abutments where specified.

Description

GRP termination bar used for terminating waterproofing membranes at wall abutments where specified.

Offers an alternative to a lead counterflashing for use at upstand details to give protection to the top edge of the waterproofing.

It should be restricted to use on upstands where a chase cannot be cut into the wall.

Also available in aluminium (specified separately).

General information

Color

Black

Finish

Smooth

Material

Glass Reinforced Plastic (GRP)

Shape

Rectangle

Other

Length

2500 mm

Width

82 mm

Guidance for specification option:

Depth.

Height

2.5 mm

Guidance for specification option:

Thickness of termination bar (GRP)

Manufacturer guidance

Thickness

Warranty description

-

Manufacturer guidance

A comprehensive range of guarantee options are available. Please contact your local Bauder Area Technical Manager for more information.

Uniclass

Pr_35_90_28_72 Roof membrane perimeter trimsPrimary

CAWS

J41/345 Perimeter trims

SKU Code

GB60012210

Specification data - Roof membrane perimeter trims

Classification data

Description

Termination bars.

Fire performance

-

Fire resistance

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer for details.

Reaction to fire

Manufacturer's standard.

Guidance for specification option:

Consult manufacturer for details.

Material

GRP.

Size

2.5 mm thick, 82 mm width/ depth.

Colour

Black.

Length (maximum)

2.5 m.

Fixing

Guidance for specification option:

Bauder termination bar, fixed above (and not through) the completed upstand waterproofing where specified.

  • The termination bar is to be correctly positioned and all holes marked and drilled through the 25 mm flat fixing area shown on the drawing opposite.
  • The contact area of the upstand and the reverse side of the termination bar is then cleaned and primed with Bauder sealant primer and allowed to dry.
  • Install with 2 No. beads of Bauder sealant to rear surface of bar, plugged and screw fixed at 300 mm centres.
  • Bauder sealant should then be applied to the protruding top lip and finished neatly with the correct tooling.

Sustainability data

Material

Glass Reinforced Plastic (GRP)

Literature

Bauder Termination Bar - Technical Data Sheet

Bauder Termination Bar - Technical Data Sheet

Similar products from Bauder Ltd

Bauder GRP Trim and Bauder GRP Watercheck Trim - Glass Reinforced Plastic Trim

Bauder GRP Trim and Bauder GRP Watercheck Trim - Glass Reinforced Plastic Trim

Bauder GRP Trim Angle - Glass Reinforced Plastic Roof Edge Trim

Bauder GRP Trim Angle - Glass Reinforced Plastic Roof Edge Trim