Batten Profile

A decorative profile which simulates the appearance of a traditional lead batten roll. The Batten Profile is suitable for new and refurbishment projects with adhered Sarnafil G waterproof membrane, on roofs of any pitch or shape.

To imitate traditional codes of lead roofing, Batten Profile should be installed at the following centres:

  • Code 4: 500 mm centres.
  • Code 5: 600 mm centres.
  • Code 6: 675 mm centres.
  • Code 7: 675 mm centres.
  • Code 8: 750 mm centres.


The Batten Profile extrusion is hot air welded to the finished adhered Sarnafil G roof membrane. Individual lengths are joined together using the Batten Profile jointing piece, which is inserted into the ends of adjoining sections to allow for movement.

General information

Uniclass 2015

Pr_35_90_28_50 Membrane standing seam profilesPrimary


J42/10 Warm deck roof covering

J42/450 Standing seam profiles

Specification data - Membrane standing seam profiles

Product Reference

Batten Profile


Lead grey

End treatment

Batten profile end piece

Standard product features


Lead grey.

End treatment:

At run ends, the Batten Profile End Piece is inserted into the angled cut end of the Batten Profile and tack welded onto the Batten Profile. For the neatest appearance the Batten Profile run should be terminated 100 mm back from the roof edge.

Similar products from Sika Sarnafil