Environmental Product Declaration (EPD) - IBU
Rapid setting and drying cement for floor screeds.
Used to produce bonded, unbonded and floating screeds for internal locations. It can also be used for large repairs to existing cement/sand screeds. Suitable for situations where early foot traffic and rapid hardening is required.
A special cement used in place of Portland Cement in cement: sand screeds for producing a rapid setting and drying floor screed that can be used as a bonded screed, an unbonded floor screed laid onto a membrane, or a floating screed laid onto compressive quilt or insulation material. It will be dry after 24 hours at 20°C to receive floor finishes, regardless of thickness.
Features and benefits:
The following thicknesses are recommended for screeds using ARDEX A 35:
Recommended thickness for type of screed needed:
Floating Domestic: 65mm+
Floating Commercial: 75mm+
M10/115 Cement:sand levelling screeds
M10/130 Proprietary quick drying levelling screeds
M10/4 Cement:sand levelling screeds
M10/7 Proprietary quick drying levelling screeds
M40/20 Existing backgrounds/ bases generally
M40/320 Existing concrete/ screeds
0–8 mm sand.
Recommended by BS 8204-1: 2003+A1: 2009, classified to BS EN 13139 standards.
In lightly loaded/domestic locations.
Compressive strength - 1 day
Compressive strength - 28 days
After 24 hours.
To BS 8204-1, BS 5385-3 and BS 8000-9.
Country of product manufacture