Ancon AMR-X Masonry Reinforcement - 2D Detail
Verified by manufacturer 3 months ago
A welded wire ladder-type reinforcement to improve the structural performance of masonry walls.
Application
- Used to improve the structural performance of masonry walls.
- Suitable for walls 100–215 mm thick
Description
A welded wire ladder-type reinforcement, manufactured in 2700 mm standard lengths, used to improve the structural performance of masonry walls, in accordance with BS 5628-2:2005, by providing additional resistance to lateral loads e.g. wind.
It can also be used to reduce the risk of cracking either at stress concentrations around openings or as a result of movement, in accordance with BS 5628-3:2005.
Features and benefits:
- Available in four standard widths (60, 100, 150 and 175 mm).
- The product is manufactured from five wire sizes which, after flattening, have an equivalent wire diameter of 3, 3.5, 4, 4.5 and 5 mm. Longitudinal wires have a minimum characteristic yield strength of 500 N/mm².
- Ancon AMR is available in austenitic stainless steel and galvanized steel. Galvanized steel is not available in 3.5 and 4.5 mm wire diameters and is not suitable for use in the external leaf of a cavity wall.
- Masonry reinforcement for collar-jointed walls is also available from Ancon.
- Ancon AMR-CJ is used to tie the two leaves of thin masonry together, so it acts as a single unit. The product consists of flat ties welded to flattened longitudinal wires. Manufactured in stainless and galvanized steel, AMR-CJ is supplied in a standard width of 175 mm to suit a wall width of 215 mm comprising of either standard bricks or 100 mm blocks.
- Ancon AMR-X features shaped cross wires which ensure the longitudinal wires are located in the centre of a bed joint, ensuring an adequate bond, accelerating construction and improving build quality.
- Tie type classified as Type A according to Approved Document E.
General information
Material | Stainless steel |
Shape | Rectangle |
Length | 2700 mm |
Width | 60 mm 100 mm 150 mm 175 mm |
Uniclass | |
CAWS | F30/270 Meshwork joint reinforcement F30/42 Channel/ slot ties used with partial fill insulation |
Product range |
Specification data - Carbon steel fabric reinforcement
Standard | BS 5628-2:2005. |
Designation | A welded wire ladder type reinforcement. |
Corrosion protection | |
Integral coatings | Not required.Galvanized steel. |
Type | AMR/S/D3.0/W60. Guidance for specification option:
AMR/S/D3.5/W60. Guidance for specification option:
AMR/S/D4.0/W60. Guidance for specification option:
AMR/S/D4.5/W60. Guidance for specification option:
AMR/S/D5.0/W60. Guidance for specification option:
|
Sustainability data
Material | Stainless steel |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
 AECOsim | - | 1 |
 ARCHICAD | - | 1 |
 Vectorworks | - | 1 |
Literature
Wall Ties and Restraint Fixings
Masonry Support Systems and Lintels
Reinforcing Large Format Stack-Bonded Masonry - Ancon AMR Masonry Reinforcement