Aluminium Angle Trim

For protection of tile edges and corners.

1. Select EAT according to tile thickness. 
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
3. Press the perforated anchoring leg of the EAT into the tile adhesive and align, mechanical fix if required. 
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower. 
6. Fill the joint completely with grout.