Verified by manufacturer 1 month ago
Airtrak VR200 Ventilated Ridge
Introduces ventilation at the head of slated or tiled pitch where it reaches the ridge.
Note: Standard AIRTRAK® details assume moderate weather conditions. Small amounts of moisture may be admitted under heavy storm conditions. Where more severe weather conditions are likely, consideration should be given to increasing the vertical overlap dimension to upstands and to slating or tiling to improve the integrity of the weathering detail. For slate and tile details the manufacturer also recommends the use of the AIRTRAK® LPS where appropriate. Contact manufacturer for further technical help.
Introduces continuous ventilation at the head of a slated or tiled roof pitch where the ridge is weathered with a lead or zinc ridge capping.
Features and benefits:
- Tiled roof applications:
- Slated roof applications:
Glass Reinforced Plastic (GRP)
H60/840 Ventilator tiles
H60/86 Ventilator tiles
H62/840 Ventilator slates
H62/86 Ventilator slates
H65/840 Ventilator tiles
H65/86 Ventilator tiles
LPS low pitch soaker
For tiled roofing, for use with VR200/ VR200-E/ VR200-FR.
For slated roofing, for use with all ridges.
Airtrak CF ClipFast fixing clips
Fixing clip for securing lead flashings to the Airtrak ventilators to prevent flashing creep over time. Clips locate in the slots found in the lower edge of the ventilator; these slots are spaced at approximately 330 mm centres.
Airtrak CF ClipFast clips, stainless steel.
70 x 60 mm, 0.6 mm thickness.
Airtrak CF ClipFast clips, copper.
70 x 60 mm, 0.5 mm thickness.
10 mm continuous air gap equivalent.
1000 x 220 mm.
Unit length x overall girth.
Cover to roof pitch.
Contains Red List materials
Country of material origin
Country of product manufacture
Recyclable at end of life