Aeromix Flowing Insulation - Liquid Insulation
Verified by manufacturer 9 months ago
ISO 9001 Quality Management
Certificate type
Statement of compliance
Certificate type
European Technical Approval (ETA)
Certificate type
An innovative EPS bound floor insulation system.
Application
Suitable for residential and commercial buildings. Aeromix can be applied to a wide range of projects, including:
- Thermal insulation of all floors.
- Filling pipes on the ground floor and on the upper floors.
- Levelling differences in height.
- Creation of a slope on flat roofs (levelling screed).
- Ideal for underfloor heating and tacker situations.
Description
Aeromix is made up of three components:
- AeroBead (EPS based).
- AeroBinder.
- Cement.
Features and benefits:
- Cement bound.
- Allows floor chambers/ unevenness to be removed from all subfloors.
- Allows under floor heating to be more efficient and cost effective.
- Over a 1000 m² installed can be installed in a day.
- Available in 155 kPa, 200 kPa or 300 kPa versions.
- 30 mm minimal installation.
- No drying expansion.
- No risk of contamination.
- No waste.
- No thermal gaps (loss of heat).
- UKCA marked.
- European Technical Assessment ETA-21/0579 of 19/10/2021.
- 80 kg CO₂ eq/m³.
- Full floor completion within seven days.
- Easy to apply and level.
- Ecological, low cement consumption.
- Improve strength in the early stages.
- Installation: 950 m²/day.
- Drying time/ accessibility: 3–5 days.
- Increase the workability.
- Improve the stability of the aggregates and flow.
- Reduce segregation, bleeding and cracks.
- Reduce the sagging flow.
General information
Color | Other |
Finish | Floated |
Material | Expanded polystyrene (EPS) Cement Other Manufacturer guidanceA mixture of EPS, Cement, Aerogel and water. |
Shape | Other Formless |
Length | Bespoke |
Width | Bespoke |
Height | Bespoke |
Warranty description | Other |
Uniclass | |
CAWS | F30/150 Full fill cavity insulation F30/10 Full fill cavity insulation E20/380 Void formers E60/330 Expanded polystyrene void formers |
Specification data - Expanded polystyrene (EPS) bead insulation
Third-party certification | European Organisation for Technical Assessment (EOTA) - ETA-21/0579.Guidance for specification option: Of 19/10/2021. |
Beads | Bonded. |
Thermal conductivity (maximum) | 0.037 W/m·K.Manufacturer guidanceLamba Value. |
Recycled content | 65%. |
Materials | EPS, cement, Aerogel and water. |
Strength | 137 kPa (6.6%) minimum. |
Thickness | 30–1000 mm (single installation). |
Volume | 93 kg/m³. |
Application temperature | 5–28°C. |
Standards | To BS EN 16025-1. |
Sustainability data
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | 80 kg CO₂ eq/m³ Self declared |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 65 % |
Third party certifications
Literature
Aeromix Information Document
Aeromix Data sheet