AEROFIL® 1
Verified by manufacturer over a year ago
Aerofil® 1 - 10mm
Aerofil® 1 - 10mm
Low density movement joint filler.
Application
- For structural expansion joints in concrete, brickwork and blockwork.
- For forming isolation joints for machine bases or similar applications.
- Can also be used on internal finishes as a gap filler or backing filler to walls, pipes, kitchen and sanitary ware before sealing with a surface sealant.
Description
A low density, compressible, closed cell polyethylene filler. primarily. The closed cell construction also prevents moisture absorption.
Features and benefits:
- Accepts temperature cycles with minimal load transfer.
- Prevents water absorption.
- 90% recovery after release of load.
- Inert to most dilute acids and alkalis.
- Resistant to oil and hydrocarbons.
- Can be cut with a sharp knife.
- Economical in use.
- Available in a range of sizes with rip-off edge to form neat sealant rebate.
General information
Material | Polyethylene |
Size | 800 x 200 mm Board size. |
Uniclass | |
CAWS | F30/610 Movement joints with sealant F30/76 Movement joints with sealant N13/580 Sealant for pointing N13/68 Sealant for pointing |
Specification data - Expanded polyethylene (PE) foam strips
Material | Polyethylene. |
Density | 28 Kg/m³ ± 10%. |
Size | - |
Thickness | 10 mm. |
Width | 75 mm.100 mm.140 mm.200 mm. |
Product Reference | Aerofil® 1 - 10mm Aerofil® 1 - 20mm Aerofil® 1 - 25mm Aerofil® 1 - 50mm |
Water absorption | 1%. |
Operating temperature | -5°C to +100°C. |
CompressiveStrength | 120 kN/m² ± 30%. |
BIM objects
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.
| Platform | Compatible | Version |
|---|---|---|
 IFC | - | 1 |
 Revit | - | 1 |