Advantage Range Unleaded Gable Abutment Trays

Advantage Range Unleaded Gable Abutment Trays

Cavity Trays Ltd Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

Preformed, unleaded, DPC cavity trays for use at pitched roof/ gable abutments.

Jump to:
+44 (0)1935 474769


A range of preformed, self-supporting, unleaded, moulded DPC cavity trays for use at stepped and staggered pitched roof gable abutments.

The range includes:

  • Catchment trays: For building in at the bottom of a slope to catch water and direct it to the outside of a masonry wall via weepholes.
  • Intermediate trays: Available in either hand and built in at each course over the length of the abutment rake.
  • Ridge tray: Used to straddle a roof ridge abutment.
  • External angles: Used in place of unleaded catchment trays when commencing laying from the corner of a building.
  • Internal angles should commencement be from an internal masonry corner.


  • No attached lead flashing; allows for in situ fitment of flashings at an appropriate time in the construction sequence.
  • Designed to suit standard 75 mm high brickwork courses.
  • Variable cavity upstand to accommodate a wide range of cavity widths.
  • Optional polystyrene strips to aid insertion and fixing of flashing.

General information




Injection moulded solid DPC


Standard trays are 330 mm long, and can be used for roof pitches of 15° upwards

Uniclass 2015

Pr_25_57_21_66 Preformed cavity traysPrimary


F30/370 Preformed cavity trays

F30/385 Junction cloaks/ stop ends for preformed dpcs/ cavity trays

F30/56 Preformed cavity trays

Specification data - Preformed cavity trays Enhanced data



To fit cavity width

50 mm.

75 mm.

100 mm.

140 mm.

Product Reference

Advantage Unleaded Gable Abutment Trays


As shown on drawing where any roof abuts cavity masonry


Catchment left hand.

Catchment right hand.

External angle.

Internal angle.

Intermediate left hand.

Show more

Rake out strips

An optional polystyrene strip can be included as an attachment to the bed course element of the tray After the tray is built in, the strip can be raked out to provide a void into which a flashing can be terminated and secured.

Not required.



Available in a range of profiles; a selection is illustrated in technical literature. Cavity Trays Ltd can advise on requirements and submit recommendations.


Third party certifications

Similar products from Cavity Trays Ltd