ABG Sudspave 40®

A system of interlocking cellular paving units designed for the stabilization of trafficked grass or gravel surfaces.

Offers a cost-effective, robust and aesthetic solution for many applications where gravel retention or grass reinforcement is required and where source-control of surface water forms part of a Sustainable Drainage Systems (SuDS) design).

Designed to be installed onto a stone sub-base construction incorporating Geogrids to minimize material and construction costs, the paving units may also be considered for ‘reduced-dig’ applications where the depth of excavation has been limited due to archaeological or SSSI concerns, or in tree-root protection zones.

To aid rapid installation, four individual ABG Sudspave units form a pre-connected 1 m² section and the paving system clips and locks together to provide a continuous integral surface which is able to resist deformation and dislocation. The paving units can be filled with either angular gravel for a hard wearing surface or with a formulated growing medium into which grass seed is sown to provide a vegetated finish suitable for occasional trafficking.

Features and benefits:

• High load bearing capacity.

• Pre-connected for rapid installation.

• UK manufactured.

• Infilled with grass or gravel to suit project requirements.

Designed for infill with either grass or gravel. Its high performance characteristics make it suitable for a very wide range of applications.

Applications:

• SuDS source control.

• Fire access routes.

• Grass car parks.

• Gravel car parks.

• Lay-bys.

• Residential parking.

• Tram subgrades.

• Slope reinforcement.

• Swale reinforcement.

• Pedestrian/ cycle paths.

• Airfields/ helipads.

• Golf courses.

• Camping sites.

• Paddocks and stables.

• Driveways.

• Garden pathways.

• Pond banks.

• Infiltration trenches.